Paper Type	::	Research Paper
Title	::	RATIS (Rapid Automatic Tyre Inflation System)
Country	::	India
Authors	::	Prabhakar N Kota || Pranil Sakinal || Varad Tamhankar || Rutika Sakore
Page No.	::	01-15

Since the discovery of tires, amelioration is being done in tires of a vehicle regularly for its improved life and its role in increasing vehicular safety. As we all know that vehicle is the most important part of our life because it helps us in traveling miles in a few minutes. The air pressure of the tires needs to be maintained at the ideal level for better running of the vehicle and its safety purposes. So, this technique was introduced keeping in mind the fuel consumption, vehicular safety, and luxury . It maintains the required tire pressure of vehicles, increases fuel efficiency, and reduces tire wear thus increasing their life and reducing tire replacement time and cost...............

Keyword : CTI, ATIS, Psi, PTO, GHG, Km/H, L, MPa..

[1]. Aneesh Rs, Babu M, Bhuvanesh, Bharat S,Mr. Rajkumar Department Of Mechanical Engineering Sri Ramakrishna Institute Of Technology, Coimbatore "AUTOMATIC TIRE INFLATION SYSTEM", International Journal of Scientific & Engineering Research Volume 8, Issue 7, July-2017 ISSN 2229-5518
[2]. Oduro, Seth & Alhassan, Timothy & Owusu-Ansah, Prince & Andoh, Prince. (2013). "A Mathematical Model for Predicting the Effects of Tire Pressure on Fuel Consumption." Research Journal of Applied Sciences, Engineering and Technology. 6. 123-129. 10.19026/rjaset.6.4046.
[3]. Indrajeet Burase, Suyash Kamble, Amol Patil, Avinash Kharat, "A Survey on Automatic Air Inflating System for Automobile.", International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297: 2007 Certified Organization) Vol. 5, Issue 10, October 2016.
[4]. P.Omprakash, T.Senthil Kumar, Velammal College of Engineering and Technology, Madurai, "M.A.R.S - Mechanized Air Refilling System", International Journal of Information Sciences and Techniques (IJIST) Vol.4, No.3, May 2014.
[5]. Mark Reiter and John Wagner, Ph.D., P.E., Mechanical Engineering Department, Clemson University, Clemson, SC 29634 USA, "Automated Automotive Tire Inflation System – Effect of Tire Pressure on Vehicle Handling", 6th IFAC Symposium Advances in Automotive Control Munich, Germany, July 12-14, 2010

Paper Type	::	Research Paper
Title	::	Credit Card Fraud Detection: A Comparative Study
Country	::	India
Authors	::	Siddharth Shinde || Pravin Chavan || Dr. Mrs. K. S. Tiwari
Page No.	::	16-20

The goal of data analytics is to delineate hidden patterns and use them to support informed decisions in a variety of situations. Credit card fraud is escalating significantly with the advancement of modernized technology and became an easy target for frauds. Credit card fraud has highly imbalanced publicly available datasets. In this paper, we apply many supervised machine learning algorithms to detect credit card fraudulent transactions using a real-world dataset. Furthermore, we employ these algorithms to implement a super classifier using ensemble learning methods. We identify the most important variables that may lead to higher accuracy in credit card fraudulent transaction detection......

 

Keywords: CreditCard,Fraud detection, Supervised machine learning, Classification, Imbalanced dataset, Sampling.

[1]. S. Bhattacharyya, S. Jha, K. Tharakunnel, and J. C. Westland, "Data mining for credit card fraud: A comparative study," Decis. Support Syst., vol. 50, no. 3, pp. 602–613, 2011.
[2]. K. Chaudhary, J. Yadav, and B. Mallick, "A review of Fraud Detection Techniques: Credit Card," Int. J. Comput. Appl., vol. 45, no. 1, pp. 975–8887, 2012.
[3]. "Mining of Massive Datasets Second Edition."
[4]. F. N. Ogwueleka, "Data Mining Application in Credit Card Fraud Detection System," vol.6, no. 3, pp. 311–322, 2011.
[5]. H. Nordberg, K. Bhatia, K. Wang, and Z. Wang, "BioPig: a Hadoop-based analytic toolkit for large-scale sequence data," Bioinformatics, vol. 29, no. 23, pp. 3014– 3019, Dec. 2013.

Paper Type	::	Research Paper
Title	::	DC Motor Based Economical Grass Cutting Machine Using Arduino: A Survey
Country	::	India
Authors	::	Rashmi Akole || Aditi Kurankar || Pragati Admane || Prof. A. R. Suryawanshi
Page No.	::	21-25

Regular grass cutting is required in lawns at school, college, company, marriage hall premises. Also it is required in different farms. Currently in India, a lengthy and time-consuming conventional method of the grass cutting is used. Working with the traditional grass cutters like cutlasses, hand scissors, machetes is a very hectic, time consuming and risky task. This gave rise to the need of grass cutting machine which will reduce human efforts and make the grass cutting work efficient and easier. The major drawbacks in the present grass cutters are green gas production resulting in high pollution, high noise production, complicated structure, high maintenance and expensive. Our system proposes a low-cost grass cutter which includes a cutting blade. In proposed system DC motors are used for grass cutting along with blades and system is controlled using Arduino controller. This paper focuses on the literature survey and the drawbacks of existing systems. The paper provides the methodology, simplified structure and a low cost designing for the grass cuttingmachine.

 

Keywords: lawn mower, grass cutting machine, DC Motor, Arduino.

[1]. Victor, V. M. and Verns, A., "Design and development of power operated rotary weeder for wetland paddy."Journal of Agricultural Mechanization in Asia, Africa and Latin America,2003.
[2]. JigarRajendrakumar Shah, "DESIGN AND ANALYSIS OF GRASS CUTTING MACHINE", International Journal of Advance Research and Innovative Ideas in Education,2017.
[3]. P. Amrutesh, B.Sagar, B Venu, "Solar Grass cutter with linear Blades By using Scotch Yoke mechanism", International Journal of Engineering Research Applications,2014.
[4]. Mr. Ankur Dave, Ashwini Dixit, "Fabrication of lawn mower", International Journal of Scientific Research and Engineering Trends,2014.
[5]. Shrishti Jain, Amar Khalore, ShashikantPatil., "Self- efficient and sustainable solar-powered robotic lawnmower." International Journal of Trend in Research and Development, Volume 2, 2014.

Paper Type	::	Research Paper
Title	::	Smart Medicine Box Using Arduino-Uno for Old Aged People
Country	::	India
Authors	::	Ms. Reshma Chhatriya || Ms. Rohini Jadhav || Ms. Aishwarya Bhagat || Dr. Mithra V
Page No.	::	26-31

Our project's main aim is to make a Smart medicine box for those users who regularly take medicines and the prescription of their medicine is very long as it is hard to remember to patients and also for their care giver. Also Old age patients suffer from problems of forget to take pills on proper time which causes certain health issues for patients having Permanent diseases like diabetes, blood pressure, breathing problem, heart problems, cancer diseases etc. We saw these problems in hospitals & people around us who have such kindofdiseases and thus based on these two problems we made smart medicine box which solve theseproblems by Setting up time table of prescribed medicines through push buttons as given in prescription Present time will be saved in RTC module and notification time will be saved in EEPROM. Therefore at the time of taking medicine system generate Notification sound and display the Bright light in certain pill boxes. So, patient can know the specific number of box from which he has to take out medicines........

[1]. Kuo GH-W. Research and implementation of intelligent MedicalBox. Kaohsiung, TW: Department of Electrical Engineering, I-Shou University; 2009. M.S.thesis
[2]. Sawand A, Djahel S, Zhang Z, Na F. Multidisciplinary approaches to achieving efficient and trustworthy eHealth monitoring systems. Commun. China (ICCC), 2014. IEEE/CIC Int. Conf.; 2014. p. 187e92.
[3]. Hayes TL, Hunt JM, Adami A, Kaye JA. An electronic pillbox for continuous monitoring of medication adherence. In: Proceesings of the 28th IEEE EMBS annual international conference, Aug. 30-Sept. 3
[4]. Viral Shah, Jigar Shah, Nilesh Singhal, Harsh Shah & Prof. Prashant Uapdhyay, "Smart Medicine Box", Imperial Journal of Interdisciplinary Research (IJIR), Vol-2, Issue-5 ,2016
[5]. Naga Udayini Nyapathi1, Bhargavi Pendlimarri2, Karishma Sk3 , Kavya Ch4," Smart Medicine Box using ARM 7 Micro controller", International Research Journal of Engineering and Technology(IRJET) , Volume: 03 Issue: 05 | May-2016

Paper Type	::	Research Paper
Title	::	Solar Energy Measurement and Monitoring System
Country	::	India
Authors	::	Mr. Suhas Ishwar Masal || Mr. Neel Sanjay Tannu || Prof. Sheetal Pawar || Mr. VishwambharM.Thorat
Page No.	::	32-36

The aim of this project is to measure solar cell parameters through multiple sensor data acquisition. In this project a solar panel is used which keeps monitoring the sunlight. Heredifferent parameters of the solar panel like the light intensity, voltage and the temperature are monitored.The light intensity is monitored using an LDR sensor, voltage by voltage divider principle, current by current sensor and temperature by temperature sensor. All these data aredisplayed on a 16X2 LCD interfaced to Arduino microcontroller.The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a bridge rectifier. The ripples are removed using a capacitive filter and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of arduino microcontroller and other circuits.

 

Keywords: Low cost, ATMEGA328, LM35, LDR, SOLAR PANEL.

[1]. Mark Z. Jacobson and Mark A. Delucchi. "Providing all s energy with wind, water, and solar power, Part I: Technologies, energy resources, quantities and areas of infrastructure, and materials" Energy Policy Volume 39, Issue 3, March2011, Pages 1154-1169
[2]. You Ying and Eric J. Hu. "Thermodynamic advantages of using solarEnergy in the regenerative Rankine power plant" Applied Thermal Engineering Volume 19, Issue 11, November 1999,Pages 1173-1180
[3]. A. D. Asiegbu "System sizing: major reason for failure of most solar streetprojects in Nigeria" International Journal of Current Research Vol. 4, Issue, 09, pp.141-143, September, 2012
[4]. Sumit N. Dutta; Mr. Vilas k. Chune; Mr. Swapnil Bansod& Nishant Yewale "Solar Energy Measurement System": Volume 3, Issue 05, March 2016.(retrieved on February 27th 2017)
[5]. Hirak Barua, and NiturajGogoi "Solar Energy Measurement System with Multiple Data Acquisition": Journal of Instrumentation Technology & Innovations, Vol 5, No 3 (2015). (Accessed on March 2nd 2017).

Paper Type	::	Research Paper
Title	::	Gesture Recognition & Wireless Alerting System Using Micro:bit
Country	::	India
Authors	::	Amey Ajgar
Page No.	::	37-40

In today's era safety is a very important aspect of our life. And security of any object is at risk when a person moves object without the owner's permission. So how would it be if we get an alert whenever the object moves? .This system will make it possible. Aim of this device is to give an alert when someone tries to move the object which has to be protected. This system is a combination of 2 Micro:bits which will be connected wirelessly with each other and whenever the Micro:bit placed near the object will move, it will send signal to the host Micro:bit and the owner will get an alert by means of buzzer and led display

 

Keywords- Micro:bit(open source hardware),Buzzer.

[1]. Sue Sentance , Jane Waite and Steve Hodges- " "Creating Cool Stuff": Pupils' Experience of the BBC micro:bit" SIGCSE '17: Proceedings of the 2017 ACM SIGCSE Technical Symposium on Computer Science Education March 2017 Pages 531–536.
[2]. Nika Klimová-"Wearables: Educational Projects Made with the BBC micro:bit" 2020 18th International Conference on Emerging eLearning Technologies and Applications (ICETA)
[3]. Gareth Halfacree- "The Wireless BBC micro:bit" The Official BBC micro:bit® User Guide (pp.161-174).

Paper Type	::	Research Paper
Title	::	Home Automation and Security
Country	::	India
Authors	::	Prabhakar Kota || Nikita Chauhan || Suket Netragaonkar || Renuka Gajbhar
Page No.	::	41-47

The real-time Camera module face detection has been made possible by using the method of Viola Jones, blob Analysis work. The software first taking Camera video/image of all the authorized persons and stores the information into database. Proposed work deals with automated system to detect and classify the Faces using CNN (Convolutional Neural Network) algorithm. The real-time Camera module body detection has been made possible by using the method of Viola jones work. The software first taking Camera module of all the authorized persons and stores the information into database. Proposed work deals with automated system to detect face and recognized the person......

[1]. B. Quintana, S. A. Prieto, A. Adan, and F. Bosche, ―Door detection in 3D colored laser scans for autonomous indoor navigation,‖ in 2016 International Conference on Indoor Positioning and Indoor Navigation (IPIN). IEEE, oct 2016, pp. 1–8
[2]. A. Llopart, O. Ravn, and N. A. Andersen, ―Door and cabinet recognition using Convolutional Neural Nets and real-time method fusion for handle detection and grasping,‖ in 2017 3rd International Conference on Control, Automation and Robotics (ICCAR). IEEE, apr 2017, pp. 144–149.
[3]. B. Axelrod and W. H. Huang, ―Autonomous door opening and traversal,‖ in 2015 IEEE International Conference on Technologies for Practical Robot Ap- plications (TePRA). IEEE, may 2015, pp. 1–6.
[4]. Y. Karayiannidis, C. Smith, F. E. V. Barrientos, P. Ogren, and D. Kragic, ―An Adaptive Control Approach for Opening Doors and Drawers Under Uncer- tainties,‖ IEEE Transactions on Robotics, vol. 32, no. 1, feb 2016, pp. 161–175.
[5]. Hteik Htar Lwin, Aung Soe Khaing, Hla Myo Tun, Automatic Door Access System Using Face Recognition International Journal Of Scientific Technol- ogy Research,Issue 06, Volume 4,June 2015

Paper Type	::	Research Paper
Title	::	IoT Based Water Pump Controller for Apartments: A Survey
Country	::	India
Authors	::	Rutuja More || Harshal Shirke || Rohit Kale || Ashok Suryawanshi
Page No.	::	48-52

Modern technology largely depends on automation and control system. Automation and control system refers to the use of various control systems for operating equipment's such as machinery, processes in factories, boilers and heat treating ovens, switching on telephone networks, steering and stabilization of ships, aircraft, automobile and other applications with minimal or reduced human intervention. The greatest advantage of automation and control system is that it saves labour. A water level indicator system is a device that indicates the level of water in a tank or reservoir. It is widely used in industrial applications such as boilers in nuclear power plants and residential applications...........

 

Keywords : automation, control system, pump controlling system, water pump, water level sensors, Arduino, IoT, Apartments.

[1]. M. M. Raykar, Parijata Vinod, Parinita Vinod, Preethi K. M, L. Jain, "Automated Water Billing with Detection and Control of Water Leakage using Flow Conservation," International Journal of Engineering Development and Research, vol. 3, issue 2, pp. 285-287, 2015.
[2]. S. Gowri, P. Pranathi, K. Sravya, "Automated Water Tank Overflow Control Unit Integrated with Mobile Application," International Journal on Information Sciences and Computing, vol. 9, no. 2, pp. 10-12, 2015.
[3]. S. Paul, M. Das, A. Sau, S. Patra, "Android Based Smart Water Pump Controller with Water Level Detection Technique," International Journal of Advanced Research in Computer and Communication Engineering, vol. 4, issue 12, pp. 534-537, 2015.
[4]. A. Nikam, N. Warhade, R. Dhawale, S. Prabhu, G.
[5]. Deshmukh, "Fully Automated System for Monitoring Water Usage using SMS and Android Application," International Research Journal of Engineering and Technology, vol. 4, issue 5, pp. 2548-2551, 2017.

Paper Type	::	Research Paper
Title	::	IOT Based Application for monitoring and Predicting Air Quality in the environment
Country	::	India
Authors	::	Vaishnavi Kulkarni || Priyanka Mudaliar || Rutuja Jaid || Abhijeet Kumar Mandal || Prof. Kranti M Kamble
Page No.	::	53-58

India dealing with pollution for a long time.For the matter of fact, in February, India was home to six out of 10 of the world's most polluted cities. While on the contrary, atmospheric pollution, surrounding pollutants are about 1000 times more likely to be transmitted to the lungs, causing diseases The main sources of air pollution are motor vehicle emissions, illegal industrial activities, harmful pesticides, and many times we see LPG gas leakages and cylinder truck accidents on road which are harmful for us and can take our lives. Therefore, poor air quality results into many health complications, such as heart disease, lung cancer, and breathing problems like asthma........

 

Keywords- Air quality, Raspberry pi, Internet Of Things (IoT), Air Quality Index (AQI), Sensors, Air pollution.

[1]. Ajitesh Kumar, Mona Kumari and Harsh Gupta "Design and Analysis of IoT based air quality monitoring system" Feb 28-29, 2020
[2]. PratishthaAgnihotri, SonamTiwari and Dr. Devendra Mohan" Design of Air pollution monitoring system using wireless sensor network" 2019.
[3]. Ravi Kishore Kodali and SairipathuriSasweth C. Rajnarayanan "Smart Indoor air pollution monitoring station" Jan 22-24 2020, Coimbatore India.
[4]. ZixuanBai "Real time prediction for Fine-grained air quality monitoring system with asynchronous sensing", Perking university 2019.
[5]. MykhailoLobur and DmytroKorpyljov and NazariyJaworski "Arduino Based Ambient Air Pollution Sensing System" University of Exeter, 2020.

Paper Type	::	Research Paper
Title	::	Smart Bin: Biomedical Waste Segregation and Management
Country	::	India
Authors	::	Lakshmi Nair || Swati Patil || Hemangi Mahajan || Mayuri Malwadkar || Bhagyashree Jagtap
Page No.	::	59-65

The idea of this project is to study the application of Image processing and Internet of Things (IoT) in developing an efficient automated mechanical sorting system for biomedical waste at its source, which would reduce the physical efforts. This project is designed to segregate biomedical waste into bins through color coding method. Segregating waste into bins would be the pioneer step for recycling and efficient treatment of hazardous waste. The IoT based smart bin checks the waste level over the dustbins by using ultrasonic sensor and stores information about thebins.

[1]. J. N. Srivastava, L. K. Verma, J. N. Srivastava and L. K. Verma, "System application using "multi-option" for hospital waste management in a hospital in india," 2006 The 4th Institution of Engineering and Technology Seminar on Appropriate Healthcare Technologies for Developing Countries, 2006, pp. 17-26, doi: 10.1049/ic.2006.0656.
[2]. V Balaji, J Sanjai, K k Pranav B. Aravindan, "Automated Domestic Waste Segregator Using Image Processing", International Research Journal of Engineering and Technology (IRJET) Volume: 06 Issue: 04 Apr2019
[3]. T.,Duraivarun,Sandesh,S.,Balaji,G.and Anandhakumar,R, "Design Of Automated BiomedicalWasteSegregationUnitUsing Image Processing", in International Journal of Current Research Vol. 7, Issue, 03, pp.13744-13748, March,2015

Paper Type	::	Research Paper
Title	::	Email Spam Detection and Filtering Using Naïve Bayes Algorithm
Country	::	India
Authors	::	Aparna Burhade Komal Nagul Uttara Divte || Prof. M. M. Dhanvijay
Page No.	::	66-70

Many techniques have been proposed to combat the upsurge in spam. All the proposed techniques have the same target, trying to avoid the spam entering our inboxes. Spammers avoid the filter by different tricks and each of them needs to be analyzed to determine what facility the filters need to have for overcoming the tricks and not allowing spammers to full our inbox. Different tricks give rise to different techniques. This work surveys spam phenomena from all sides, containing definitions, spam tricks, anti spam techniques, data set, etc. Finally, we discus the data sets which researchers use in experimental evaluation of their articles to show the accuracy of their ideas. Machine learning methods of recent are being used to successfully detect and filter spam emails.......

 

Keyword: Techniques, Emails, Spamfiltering, Machine Learning, Algorithms

[1]. https://in.springboard.com/blog/email-spam-filtering-using-naive-bayes-classifier/
[2]. https://www.ijsdr.org/papers/IJSDR1906001.pdf
[3]. https://towardsdatascience.com/na%C3%AFve-bayes-spam-filter-from-scratch-12970ad3dae7
[4]. https://medium.com/@ar3441/spam-filtering-using-naive-bayes-98a341224038

Paper Type	::	Research Paper
Title	::	Dimensional Fault Detection using Machine Vision
Country	::	India
Authors	::	Amjad Ali Kudsi || Shivam Rai Rohit || Adale Shivam Shravgi || Pranoti P. Mane || Aparna A. Dhavlikar
Page No.	::	71-77

Dimensional accuracy is the most important aspect when it comes to manufacturing of machine tools like drill bits, screws, etc. Deficiency of which causes heavy losses to the manufacturing companies. To avoid that, industries need a system at the end of manufacturing cycle, which would check the dimensional accuracy of each and every product, in a continuous manner, utilizing as less time as possible on each product. In this paper, we have designed such a system, in which we have used ML models to replicate the dimensions of each distinctive product and use them to detect the faulty products using machine vision. This system can detect the type of each product, declares the product as faulty if it doesn't match the dimensions of any product, within a specific tolerance.

 

Keyword: Machine Vision, Machine Learning, OpenCV, Conveyor system, Computer Vision, Gaussian Blur, Grayscale Image, Contours, dimensional measurement, shape detection

[1]. T. I. Nath. (2020, March). "How Do Recalls Affect a Company?". Investopedia [Online]. Available: https://www.investopedia.com/articles/investing/010815/how-do-recalls-affect-company.asp
[2]. M. Aamir. (2016, June). "The Importance of Precision in the Manufacturing Industry". Celebrate Productions [Online]. Available: https://www.celebrateproductions.net/the-importance-of-precision-in-the-manufacturing-industry/
[3]. W. J. Zhang, D. Li, F. Ye and H. Sun "Automatic Optical Defect Inspection and Dimension Measurement of Drill Bit" Luoyang, China; June 2006
[4]. A. Volkan Atli, O. Urhan, S. Erturk and M Sonmez "A computer vision-based fast approach to drilling tool condition monitoring" Kocaeli, Turkey; May 2006
[5]. Zs. J. Viharos and D. Chetverikov "Vision based, statistical learning system for fault recognition in industrial assembly environment" Budapest, Hungary; 2016

Paper Type	::	Research Paper
Title	::	Detection and Protection of DDoS Attack Based on Cloud Computing
Country	::	India
Authors	::	A.LAVANYA || Dr.N.SHANMUGAPRIYA
Page No.	::	78-87

Currently, the Distributed Denial of Service attack (DDoS) are expanded rampantly on the internet, the threshold of such assaults is fairly low for the malicious attackers. Therefore, the DDoS assaults are serious threats to the protection availability of the cloud computing. Aiming at the threats, this paper research the malicious visitors identification and the detection scheme of the denial provider assault beneath the soft-ware-defined Network (SDN), which makes use of the SDN forwarder to distinguish the DDoS assault visitors and undertake the corresponding filtering capacity to gain safety for the disbursed denial carrier attack. This paper first off implements cloud platform useful resource calls.....

 

Keyword: Cloud computing; software-defined network (SDN); distributed denial service attack; attack detection.

[1]. Zissis, D.; Lekkas, D. Addressing cloud computing security issues. Future Gener. Comput. Syst. 2012, 28, 583–592.
[2]. Sridhar, T. Cloud Computing: Infrastructure and Implementation Topics. Int. Protoc. J. CISCO 2009, 12, 4.
[3]. Los, R.; Gray, D.; Shackleford, D.; Sullivan, B. The Notorious Nine: Cloud Computing Top Threats in 2013; CSA, Cloud Security Alliance: 2013. Available online:
[4]. Ristenpart, T.; Tromer, E.; Shacham, H.; Savage, S. Hey, You, Get off of My Cloud: Exploring Information Leakage in Third-party Compute Clouds. In CCS'09, Proceedings of the 16th ACM Conference on Computer and Communications Security, Chicago, IL, USA, 9–13 November 2009; ACM: New York, NY, USA, 2009; pp. 199–212.
[5]. Amazon, EC2. Available online: https://aws.amazon.com/ec2 (accessed on 4 August 2017).

Paper Type	::	Research Paper
Title	::	Secure File Storage in Cloud Computing Using Hybrid Cryptography Algorithm
Country	::	India
Authors	::	P. N. KOTA || OMKAR K. PINJARE || SHRADHA K. DIGHE || Tushar N. Warale
Page No.	::	88-92

Recruitment is a function of human resource management by which an organization can attract the potential candidates and select the most appropriate employees for the organization.Now-a-days the people are extensively adaptive to the technology and that's why e-recruitment has become a popular practice followed by the organization for hiring employees. The online recruitment document sharing application that will help in sharing the important documents between the College authority (Administrator) and the Company HR with great ease. The college students will be given the hard copy of their document (resume) that they need to study for the recruitment.........

 

Keyword: Cloud computing, Hybrid Cryptography

[1]. R. Alvaro-Hermana, J. Fraile-Ardanuy, P. J. Zufiria, L. Knapen, and D. Janssens, "Peer to peer energy trading with electric vehicles," IEEEIntell. Transp. Syst. Mag., vol. 8, no., pp. 33–44, Fall 2016.
[2]. Y. Xiao, D. Niyato, P. Wang, and Z. Han, "Dynamic energy trading for wireless powered communication networks," IEEE Commun. Mag., vol. 54, no. 11, pp. 158–164, Nov. 2016.
[3]. J. Kang, R. Yu, X. Huang, S. Maharjan, Y. Zhang, and E. Hossain, "Enabling localized peer-to-peer electricity trading among plug-in hybrid electric vehicles using consortium blockchains," IEEE Trans. Ind. Informat., vol. 13, no. 6, pp. 3154–3164, Dec. 2017.
[4]. N. Z. Aitzhan and D. Svetinovic, "Security and privacy in decentralized energy trading through multi-signatures, blockchain and anonymous messaging streams," IEEE Trans. Depend. Sec. Comput.
[5]. M. Mihaylov, S. Jurado, N. Avellana, K. Van Moffaert, I. M. de Abril, and A. Now, "Nrgcoin: Virtual currency for trading of renewable energy in smart grids," in Proc. IEEE 11the Int. Conf. Eur. Energy Market, 2014, pp. 1–6.

Paper Type	::	Research Paper
Title	::	Speaking System for Dumb & Deaf Using Hand Gestures
Country	::	India
Authors	::	Aachal Dhomane || Sanjana Pardeshi || Yogita Ajgar || Srishti Dwivedi
Page No.	::	93-99

Vocal communication is a means of communicating our feelings, messages, and records. However, due to physical limitations, some of us are not gifted with the ability to communicate our feelings verbally with others. Deaf and mute people have the most trouble interacting with others. Normally, deaf and mute people communicate using sign language, but this becomes problematic when others do not understand the sign language. This project proposes a sign-to-letter translator device that utilizes a hand glove. Any deaf or mute person may use the glove to communicate with people who do not understand sign language. The performed signals, with the gloved hand, can be heard over the speaker..........

 

Keyword: Flex, Accelerometer, Arduino, Bluetooth, Android Mobile

[1]. Yun Li,Xiang Chen, Jianxun Tian, Xu Zhang, Kongqiao Wang and Jihai Yang, ―‖Automati Recognition of Sign Language Subwords based on Portable Accelerometer and EMG Sensors‖, IEEE Engineering in Medicine and Biology Society, Vol.59, No.10, pp 2695 –2704, October 2012.
[2]. Laura Dipietro, Angelo M. Sabatini and Paolo Dario ―A Survey of Glove-Based Systems and Their Applications‖, IEEE Transactions on Systems, Man and Cybernetics —Part C: Applications and Review, Vol. 38, No. 4, pp 461-483, July 2008.
[3]. Praveen Kumar, S Havalagi and Shruthi , ―Hand Gloves that give voice to the Voiceless‖, International Journal of Advances in Engineering & Technology, Vol. 6, No.1, pp. 471-489, March.
[4]. Sonal Garg, Shivani Singhal, Suman Kumari.‖Hand Gesture Recognition and Voice conversion system‖. In International Journal of Scientific & Engineering Research, Volume 6, Issue 10, October-2015.
[5]. Sanshzar Kettebekov, Mohammed Yeasin and Rajeev Sharma, ―Improving Continuous Gesture Recognition with Spoken Prosody‖, Proceedings of the 2003 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR‗03), ISBN # 1063-6919/03,pp.1-6