Title	::	Electric Vehicle Charging Station
Country	::	India
Authors	::	Shreedhar Dawar || Tejas Zimal || Siddharth Bagul || Abhijeet Tambade || Sangeeta Jain
Page	::	01-07

Wireless charging of gadgets is one of the new emerging technologies in the world at the moment. The most common methods used at the moment are wireless power transfer by inductive coupling and resonant coupling. Also, Electric Vehicle is the modern technology to help reducing the fuel consumption. So, this paper is combining these two technologies to get rid of the copper cables used for charging the batteries of the Electric Vehicles (EVs). A methodology and principle of operation are devised for wireless power transfer through resonant coupling, and a feasible design is modelled accordingly. The resonant coupling technique is used because of high efficiency and large amount of the energy transferred over a longer distance compared to inductive coupling. Also, to indicate its versatility and range of applications, the power transferred will be used to charge a battery with the aid of additional circuitry

 

Keywords: - Battery Charging, Electric Vehicle, Electric Vehicle Charging Station, Resonant Coupling, wireless power transfer

[1] Prof. Vishal V. Pande, Pooja D. Doifode, Dhanashree S. Kamtekar, PrashantP.Shingade, Wireless Power Transmission Using Resonance Inductive Coupling Int. Journal of Engineering Research and Applications ISSN : 2248-9622, Vol. 4, Issue 4(Version 9), April 2014, pp.46-50 [2] P.V. Nikitin, K.V.S. Rao and S. Lazar, An overview of near field UHF RFID. in Proc. IEEE Int. Conf. RFID, Grapevine, TX, 2007, pp. 167-174. [3] J. Kim, S. Kong, H. Kim, I.S. Suh, N.P. Suh, D.H. Cho, J. Kim and S. Ahn, Coil design and shielding methods for a magnetic resonant wireless power transfer system. Proc. IEEE vol. 101, pp. 1332-1342, Jun. 2013. [4] G.A. Covic and J.T. Boys, Inductive power transfer, Proc. IEEE vol. 101, pp. 1276-1289, Jun. 2013. [5] C.S. Wang, O.H. Stielau, and G.A. Covic, Design considerations for a contactless electric vehicle battery charger, IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1308-1314, Oct. 2005

Title	::	Changing Faces of Education System from Ancient India to Present Digital Education in India
Country	::	india
Authors	::	Dr.Ritu Sharma || Dr. P. N. Nemade
Page	::	06-11

This paper is going to throw light on the aspect how Digital Education system has changed the way of teaching and learning from Ancient education system to the present Digital way of education. The implementation of Hi-Tech technologies in education system is bridging the gap between the modern and old methods of teaching and learning. In Ancient India there was different education system-1. Gurukul education System, where pupils lives with their guru and help them in their daily chorus and Guru taught them about Spiritual, Religious and Vedas. In Gurukul education system pupils belonging to different castes were educated. 2. Education in Medieval India: After the Islamic invasion of India education system has changed. The rising influence of Islam led to establish of Madrassa for Muslims and Vedic Schools for Hindus. 3. Education in Colonial Period: British stress on English (missionary) schools. The main aim of the missionaries was to convert the native Indian to Christianity. 4. Present education system: Soon after independence in 1947, giving education to all was a priority.......

Keywords: - Gurukul system, medieval system, Colonial System, Education in 2000 era, Modern methods of teaching like-Smart board, Smart class, E-learning.

[1] http://en.encyclopediaofjainism.com/index.php/Gurukul_Education_System_in_Ancient_India. [2] https://en.wikipedia.org/wiki/Education [3] https://en.wikipedia.org/wiki/History_of_education_in_the_Indian_subcontinent.

Title	::	Integration of Solar and Wind Energy System for Hybrid Power Generation
Country	::	India
Authors	::	Varad Bagwe || Abhijeet Thoke || Charchit Vatsa || Dibyanshu Pandey || Sangeeta Kotecha
Page	::	11-15

With the increased global warming concern it is becoming important to find an alternative to conventional energy sources causing less pollution and leading to sustainable use of available resources. This has encouraged renewable energy generation to become a leader in energy sector but the main obstacle in its path is its cost effectiveness. This has motivated for combining two or more renewable energy resources i.e. hybrid power generation. The paper deals with the study and design of hybrid system of solar and wind energy for rural area's electrification.

 

Keywords: - Flexible solar panels, hybrid power system, PWM charge controller, rural electrification, sine wave inverter, and vertical axis wind turbine.

[1] Terrence C. Sankar, The case for vertical axis wind turbines, Proc. of clean Technology Conf. and Trade ShowPittsburgh, PA, 2008, 136 -139. [2] Gazi, S.M. Mahaiminul, I and Salim, K.M (2009); Design and construction of Microcontroller Based Maximum Power Point [3] stPWM Charge Controller for Photovoltaic Application. Development in Renewable Energy Technology (2009) 1 internationaConference, Pp. 1-4. [4] Enric, P.U. and Micheal M.D. (1998); Recommended Practices for Charge Controllers. Renewable Energy and Hybrid System Group CANMET Energy Diversification Research Laboratory [5] P N Shankar,Development of vertical axis wind turbines, National Aeronautical Laboratory, Bangalore, C 2, 1979, 49- 66.

Title	::	Survey on - Smart City Development Using IOT
Country	::	India
Authors	::	Nikita Patil || Shrish Nagraj || Ankita Patil || Sharvari Nagraj || Samiksha Khedekar
Page	::	16-19

IoT (Internet of Things) is the system of physical articles gadgets, vehicles, structures and different things implanted with hardware, programming, sensors, and system network that empowers these items to gather and trade information. The fast advancement of data innovation (IT) has presented a hyper associated society in which objects are associated with cell phones and the Internet furthermore, speak with each other The web of things enables items to be detected and controlled remotely crosswise over existing system foundation. In this paper I have outlined substantial IoT based administration models which are useful to scholarly also, modern world to comprehend IoT business

 

Keywords -IOT, Smart City, Protocols, Technology

[1] Andrea Zanella, Internet of Things for Smart Cities, International Journal of Modelling and Simulation, 10.1109/JIOT.2014.2306328, IEEE Internet of Things Journal. [2] SmartSantander. [Online]. Available: http://www.smartsantander.eu/. [3] Zeinab Kamal Aldein Mohammeda , Elmustafa Sayed Ali Ahmedb, Internet of Things Applications, Challenges and Related Future Technologies, EISSN 2392-2192, World Scientific News [4] P. Bellavista, G. Cardone, A. Corradi, and L. Foschini, "Convergence of MANET and WSN in IoT Urban Scenarios," IEEE Sensors Journal, vol.13, no.10, pp. 3558-3567, Jun. 2013. [5] M. M. Rathore, A. Ahmad, A. Paul, and S. Rho, "Urban planning and building smart cities based on the internet of things using big data analytics", Comput. Netw., 2016, DOI: 10.1016/j.comnet.2015.12.023

Title	::	Secured Tam Simulator
Country	::	India
Authors	::	Geetesh Gadekar || Sarvesh Gadekar || Meghana Rahe || Prof. Renuka Nagpure
Page	::	20-24

Security of Money, Data etc. is most important in today's world. This project is based on Security of ATM. In this project we will simulate an ATM machine where dynamic computergenerated password is provided to user for every transaction. As soon as user enters account no, user must provide his/her finger print to ATM machine using a Biometrics Finger Print Scanner, if the finger print is validated properly, a new dynamic computer-generated password will be sent to user on his/her mobile phone on the number which is registered at bank. Using that auto generated password user will be able to login into the account. After completing transaction when user log's out of the account, the password will be automatically destroyed.This way we can have a secure ATM transaction every time...

 

Keywords - Security, fingerprint, password, ATM, simulate

[1] Krishna Nand Pandey, Md.Masoom, SupriyaKumari and PreetiDhiman, "ATM Transaction Security Using Fingerprint/ OTP". Available at: inpressco.com/wp-content/uploads/2015/04/Paper1031157-1159.pdf [2] Mohammad Hamid Khan. "Securing ATM with Biometric and OTP."Available at: www.ijritcc.org/download/1429768516.pdf [3] S. Kanimozhi and D. Revathy. "Secure Authentication for ATM Implementing QR Code Using Mobile Devices."Available at: www.ioirp.com/Doc/IJIRCSE/V2_I4/1ICISET218.pdf [4] Rasib Khan, Ragib Hasan and Jinfang Xu. "SEPIA: Secure-PIN-Authentication-as-a-Service for ATM using Mobile and Wearable Devices."Available at: http://ieeexplore.ieee.org/document/7130868/ [5] Iwasokun Gabriel Babatunde and Munda Josiah Lange. "Experimental study of thumbprint-based authentication framework for ATM machines."Available at: http://ieeexplore.ieee.org/document/6918235/

Title	::	Proactive Security Analysis in Network
Country	::	India
Authors	::	Tanvi Kapdi || Priya Porwal
Page	::	25-28

With the advent of new technology and modernization today most of the organizations opt for multilayer network architecture and heterogeneous server environments in order to fulfill the organization's increasing demands. But the major concerns for those organizations are "security" and thus every organization should have a build in set of policies that must comply with the goals and objectives of the organization. To meet up with these goals and objectives the optimal solution is through penetration testing. The process of penetration testing involves an active analysis of the system for any potential vulnerability. This analysis is carried out by considering oneself as the active attacker and exploiting the security of the system. Effective penetration test will couple this information with an accurate assessment of potential impacts to the organization and outline a range of technical and procedural countermeasures to mitigate the risk. Though being such an exclusive approach still there are certain technical problems in the current penetration testing system which needs a detailed study of the penetration test methodology to overcome the challenges faced by the information security industry..

Key words: - penetration testing, network security, ethical hacking, proactive security policy..

[1] Khidzir, N.Z., Mohamed, A. and Arshad, N.H.H., "Information Security Risk Management: An Empirical Study on the Difficulties and Practices in ICT Outsourcing", NETAPPS 2010. [2] Kshetri, N., "The simple economics of cybercrimes", IEEE Security and Privacy (2006), Volume: 4, Issue: 1. [3] Kotenko, I. and Bogdanov, V., "Proactive monitoring of security policy accomplishment in computer networks", IDAACS 2009 [4] Hamisi, N.Y., Mvungi, N.H., Mfinanga, D.A. and Mwinyiwiwa, B.M.M., "Intrusion detection by penetration test in an organization network", ICAST 2009. [5] Bishop, M., "About Penetration Testing", IEEE Security and Privacy (2007), Volume: 5, Issue: 6..

Title	::	Hyper loop: Transportation Redefined
Country	::	India
Authors	::	Aditya Kale || Chinmay Bane || Aniruddha Dhurde || Akanksha Wala || Pragya Jain
Page	::	29-34

We live in a fast paced world. Cities are the spine of the economy. Transportation facilitates this growth, and it will continue to do so for the foreseeable future. Contrary to the need of the hour, existing transport technologies are slow, expensive or a combination of both. An innovation such as The Hyperloop presents itself as a solution to this. The Hyperloop is a proposed system of transport that would see pods or capsules travel at high speeds through a tube that has been conditioned into near-vacuum. The capsules would levitate using air bearings, similar to how pucks travel across an air hockey table. With so little friction in the tunnel, the pods would be able to travel at massive speeds projected up to 1200 kmph. The pod would initially launch using a linear induction motor before levitation takes place and the pod will then glide at immense speeds in the low-pressure environment...........

 

Keywords - Air Bearings, Capacitor Bank, Capsule, Coil Gun, Compressor Fan, Evacuation, Kantrowitz Effect, Linear Induction Motor, Solar Arrays

[1] Elon Musk, Hyperloop Alpha, SpaceX, 2013. [2] Stefan Lundström, Stockholm-Helsinki prefeasibility study, KPMG, 2016. [3] https://hyperloop-one.com/blog/addressing-congestion-indias-most-bustling-corridor-pune-mumbai. [4] Ahmed Hodaib, Samar, et al, International journal of Mechanical, Aerospace, Industrial, Mechatronics and Manufacturing engineering, 10(5), 2016. [5] Chin, Jeffrey C.; Gray, Justin S.; Jones, Scott M.; Breton, Jeffrey J. Open-Source Conceptual Sizing Models for the Hyperloop Passenger Pod (PDF), 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2015..

Title	::	Study of Ism Band Technologies
Country	::	India
Authors	::	Sejal D'mello || Reena Somani || Vaishali Salvi || Rovina Dbritto || Pranoti Nage
Page	::	35-39

The ISM band is a general purpose part of the radio spectrum that can be used without a license. The only requirement for developing products in the ISM band is compliance with rules governing this part of the frequency spectrum. These rules vary from country to country. In the United States, the FCC defines these rules, while ETSI is the governing body in Europe. Mostly used ISM bands are the 2.4GHz band and the sub-1GHz bands. Because of the cluttering in the 2.4GHz bands, some activities have been seen in the 5GHz band, but they remain very limited because of achievable range concerns. The last few years have witnessed the emergence of several wireless standards operating in the ISM band. These standards along with proprietary solutions provide huge opportunities for developing a wide range of wireless products. These standards differ from one another by their data rates, communication ranges, application domains and the modulation techniques used. This article presents an overview of popular ISM bands in different regions of the world. Furthermore, analysis of some most prominent wireless standards available today like Bluetooth, Wi-Fi, Zigbee and IEEE 802.15.4 is given.

Keywords – IEEE, ITU, WDCT, NFC, WLAN, RF, RFID, UNII, Ptmp, HUMAN

[1] Andrea Goldsmith, " Wireless Communications", 2004. [2] Ryuji kohno, Reuven Meidan, and Laurence B. Milstein, "Spread spectrum access methods for wireless communications", in [3] IEEE Communication Magazine, vol. 33, pp. 58 – 67, 1995. [4] J.M. Peha, "Spectrum Management Policy Options", in IEEE Communication Surveys, vol. 1, no.1, pp. 2-8, 1998. [5] Logica UK Limited (now part of CGI) provided to the Ministry of Defence, "Market Study of the LE 2400 MHz band", Crown.

Title	::	Software Testing Strategies and Techniques
Country	::	India
Authors	::	Reena Somani || Sejal D'mello || Vaishali Salvi || Rovina D'britto || Pranoti Nage
Page	::	40-46

Software testing is very important to reduce the errors, maintenance and overall software costs. One of the major problems in software testing is how to know a suitable set of test cases to test a software system. We identify a number of concepts that every software engineering faculty and student should have learned. This paper describes Software testing, need for software testing, Software testing goals and principles. Further it describe about different Software testing strategies and different software testing techniques. Finally it describes the difference between software testing and debugging.

 

Keywords - Software Testing ,Debugging,Software Testing Goals, principles, , Software Testing strategies Software Testing Techniques.

[1] Sahil Batra and Dr. Rahul Rishi,"IMPROVING QUALITY USING TESTING STRATEGIES," Journal of Gobal Research inComputer Science, Volume 2,No.6,June 2011. [2] S.M.K Quadri and Sheikh Umar Farooq,"Software Testing-Goals,PrinciplesandLimitations,"International Journal of Computer Applications, Volume 6-No.9,September 2010. [3] Mohd. Ehmer Khan,"Different Formsof Software Testing Techniques for Finding Errors,"IJCSI International Journal of Computer Science Issues,Vol. 7, Issue 3, No 1, May 2010. [4] Ajay Jangra, Gurbaj Singh, Jasbir Singh and RajeshVerma,"EXPLORINGTESTINGSTRATEGIES,"InternationalJournalof Information Technology and Knowledge Management, Volume 4, NO.1,January-June 2011. [5] Jovanovic and Irena,"Software Testing Methods and Techniques," May 26,2008..

Title	::	Four Quadrant Dc Motor Drive
Country	::	India
Authors	::	Rajeev Valunjkar || Ketan Teke || Shreyas Vasoliya || Akash Ubale || Vaibhav Dabholkar
Page	::	47-50

DC motor drives are used drastically in adjustable pace drives and function manage programs. This paper proposes a way to govern the rate and route control of a DC motor with the help of a 4 quadrant DC-DC chopper. The speed under the base velocity may be controlled by way of armature voltage manage technique. MOSFETs are used for the switching operation of the chopper. The gates of those MOSFETs are given PWM which affords the 4 quadrant operation. This PWM (Pulse Width Modulation) is generated through programming. of microcontroller the use of embedded c program language period.

 

Keywords - Four quadrant DC-DC chopper, Pulse Width Modulation, mosfet.

[1] Ainee Ansaari, Hardik Mehta, Four Quadrant Operation of Chopper – Fed Separately Excited DC Motor by Decoupled PWM Control Using Digital Signal Processor, International Journal of Science, Engineering and Technology Research (IJSETR), Volume 4, Issue 5, May 2015 [2] Nikhil Krishna Bajjuri, Design and Implementation of Four Quadrant DC Drive Using Chopper, 978-1-4799-7678-2/15/$31.00 ©2015 IEEE [3] Pratik J Patel, Hardeep J Patel, PWM Based Speed Control for a DC MotorInternational Journal of Science, Engineering and Technology Research (IJSETR) Volume 06, Issue 04, April 2017, ISSN: 2278 -7798 [4] Gopal K, Dubey, Fundamental of electric drives, Narosa Publishing House

Title	::	Power Consumption Monitoring and Home Automation using iot
Country	::	India
Authors	::	Anket Narkar || Karan Kunnumal || Sagar Kanteliya || Suvarna More || Vikrant More
Page	::	51-54

The idea of smart power monitoring using IoT and Arduino have been introduced. We are using Arduino because it is energy efficient i.e. it consume less power, it is fastest and has two UARTS. IOT based power saving and consumption using wifi module is a network path in order to communicate, exchange data or control each other.Monitoring and keeping tracking of your electricity consumption for verification is a tedious task today since you need to go to meter reading room and take down readings.AIM for the planning of a system which will minimize energy waste in home environments with efficiency managing devices operation modes. The use of Wi-Fi module provides a feature of notification through internet. One can easily access the monitoring through web page that we designed. Current reading can be seen on web. Automatic ON & OFF of appliances is possible. Threshold value setting and sending of notification is the additional task..

 

Keywords - Home Automation, IOT, Power monitoring, Webpage, Wi-Fi.

[1] AhmedElShafee,KarimAlaaHamed,Designand Implementation of a Wi+Fi Based Home Automation System,InternationalJournalofComputer,Electrical,Automation,ControlandInformationEngineeringVol:6,No:8,2012. [2] OfoegbuOsita Edward, An Energy Meter Reader with Load Control Capacity and Secure Switching Using a Password Based Relay Circuit, PP-978-1-4799-8311-7, Annual Global Online Conference on Information and Computer Technology, IEEE 2014. [3] Yingying Cheng, Huaxiao Yang, Ji Xiao, XingzheHou, Running State Evaluation Of Electric Energy Meter, PP978-1-4799-4565-8, "Workshop on Electronics, Computer and Applications‟, IEEE 2014. [4] Sahana M N, Anjana S, Ankith S,K Natarajan, K R Shobha, Home energy management leveraging open IoT protocol stack , PP- 978- 1-4673-6670-0, "Recent Advances in Intelligent Computational Systems (RAICS)‟, IEEE 2015. [5] Luigi Martirano,MatteoManganelli,DaniloSbordone,Design and classification of smart metering systems for the energy diagnosis of buildings,IEEE 2015.

Title	::	Resonant Converter Based Wireless Power Transmission
Country	::	India
Authors	::	Ishani Engineer || Shruti Jadhav || Vijetha Jogu || Pooja Sawant || Pragya Jain
Page	::	55-60

This paper presents a wireless transmission system aimed to provide electrical utility power to electrical appliances wirelessly. The proposed operation involves, converting utility power into high-frequency power signal using resonant converters. This power is transmitted to receiving side using an antenna, the load being DC load..

 

Keywords -Antenna, gate driver, high switching frequency, Inverter, RF Power MOSFET.

[1] George Lakkas, "MOSFET power losses and how they affect power supply efficiency," Texas instruments. [2] George J Krausse, "DE-SERIES fast power mosfet," Directed Energy Inc. [3] Juan M. Rivas, Yehui Han, Olivia Leitermann, Anthony D. Sagneri and David J. Perreault, "A High-Frequency Resonant Inverter Topology With Low-Voltage Stress," IEEE transactions on power electronics, Vol. 23, No. 4, JULY 2008. [4] D. Nikam, R. Rane, and M. Joshi "'Lunar wireless power transfer‟‟ National Conference on Innovative Paradigms in Engineering & Technology (NCIPET-2012) Proceedings published by International Journal of Computer Applications (IJCA), pp. 13 -18. [5] A. Munir and B. T. Ranum, "Wireless Power Charging System for Mobile Device Based on Magnetic Resonance Coupling," in The 5th International Conference on Electrical Engineering and Informatics, Bali, 2015, pp. 221–224.

Title	::	Speed Control of DC Motor Using Soft Starter: A Review
Country	::	India
Authors	::	Saurav Shama || Vivek Ghadge || Salman Aejaz || Pragya Jain || Priyanka Sharma
Page	::	61-66

DC motor has variety of industrial applications which have variable speed and load characteristics due to its ease of control. The speed control can be achieved in many different ways such as, Field Control, Armature voltage control, Armature resistance control. The traditional method of speed control has many drawbacks such as, mechanical losses, switching losses. To minimize such losses new and advanced technique is being used. This paper will be focusing on a simplified techniques of speed control by use of Soft Starter. The technique to achieve soft starting is by use of Pulse Width Modulation, Firing Angle method, PID controller, Chopper control, Fuzzy logic. These methods are widely used because of their high efficiency and they can be implemented with any type of dc motor.

 

Keywords - Chopper control, Firing Angle, Fuzzy Logic, PID controller, Pulse Width modulation.

[1] Khan Masoom Raza, Mohd. Kamiland Pushpendra Kumar, Speed cpntrol of DC motor by using PWM, International Journal of Advanced Research in Computer and Communication EngineeringVol. 5, Issue 4, April 2016 , 2278-1021 [2] Jeetender Singh Chauhan, Sunil Semwal, International Journal of Engineering Research and Applications (IJERA), Vol. 3, Issue 1, Jannuary- February 2013, ISSN: 2248-9622. [3] Cosmas TatendaKatsambe, VinukumarLuckose and NurulShahrizanShahabuddin, Effect of pulse width modulation on motor speed, International Journal of Students' research In technology & Management, Vol 5, No 2, June 2017, pp42-45, ISSN 2321- 2543. [4] Arvind, S.K., Arun, T.A., Madhukar, T.S., and Deka, J., Speed control of DC motor using PIC16F877A microcontroller, Multidisciplinary Journal of Research In Engineering and Technology, 1(2), 223-234. [5] Bakibillah, A.S.M., Rehman, N. and Zaman, U.A., Microcontroller based closed loop speed control of DC motor using PWM technique, International Journal of Computer Applications, 3(1), 778-783.

Title	::	Theft Detection using Machine Learning
Country	::	India
Authors	::	Ajay Kushwaha || Ankita Mishra || Komal Kamble || Rutuja Janbhare || Prof. Amruta Pokhare
Page	::	67-71

Theft is increasing day by day and it has become one of the never ending problem in the world. Since, there are several detecting devices which are already available in the market today, but these devices had no provision to automatically detect theft attempts by alarming the owner. To solve this problem, Camera footage based theft detection will be used with the help of machine learning to detect theft occurrence. System will detect the motion with the help of convolution neural networks and an alert message will be sent to the owner along with captured image and options such as neglect, call the police or fire brigade...

 

Keywords - Anti-Theft Device, Convolutional Neural Networks (CNN), Machine Learning, Raspberry Pi, Tensor Flow.

[1] Rhowel Dellosa, "Development of an Anti-Theft Device using Motion Detection and Body Temperature", Asia Pacific Journal of Multidisciplinary Research, December 2014. P-ISSN 2350-7756 | E-ISSN 2350-8442 [2] Xinyi Zhou, Wei Gong, WenLong Fu, Fengtong Du, "Application of Deep Learning in Object Detection", International Journal of Innovative Research in Advanced Engineering (IJIRAE), June 2014. ISSN: 2349-2163 [3] Yong-Deuk Shin, Jae-Han Park, Ga-Ram Jang, Moon Hong Baeg, "Moving Objects Detection using Freely Moving Depth Sensing Camera", 21st International Conference on Pattern Recognition, November 2012. [4] Dixit Suraj Vasant, Babar Apeksha Arun, Meher Priya Shivaji,"Raspberry-Pi Based Anti-Theft Security System with Image Feedback", Journal Of Information, Knowledge, And Research in Electronics and Communication Engineering, October 2017. ISSN: 0975 – 6779 [5] Rahane Madhuri, Pathak Mayuri, Wadekar Ashabai, More Rupali, "Study of Theft Detection and Tracking using Raspberry Pi and PIR Sensor", International Journal of Latest Trends in Engineering and Technology (IJLTET), September 2015. ISSN: 2278-621X

Title	::	Hybrid Power Generation
Country	::	India
Authors	::	Rahul Vichare || Sanket Vaze || Shubham Raut || Vinit Tagarse || Suvarna More
Page	::	72-75

Energy today, is the need of 21st century. The renewable energy resources therefore are used in tremendous amount as they are easily available and cost free. But these energies in standalone forms have disadvantages such as unpredictability, availability in all time etc. which can be overcome by hybrid energy systems. They are basically consists of combinations of number of renewable energy resources. They provide efficient response against voltage and frequency fluctuations, harmonic measures and power issues in standalone systems. Hybrid power system provide reduction in complexity, maintain lowest unit cost, energy fluctuations due to DPSP (deficiency of power supply probability), with the help of proper design, advanced fast response, good optimization and control feasibility. There are various research has been done and continuously achieve new technologies and idea in this system. The paper report will discuss the different system to organize the generation of renewable sources...........

 

Keywords - grid, hybrid generation energy, Solar power, wind power.

[1] Vaibhav J. Babrekar, Shraddha D. Bandawar and Ashwini R. Behade, Hybrid Solar -Wind Power Generator , International Journal Of Computer Applications (0975-8887)Volume 165-No.5,May 2017 [2] Ashish S. Ingole ,Prof.Bhushan S.Rakhonde, Hybrid Power Generation System Using Wind Energy AndSolar Energy ,International Journal Of Scientific And Resarch Publications, Volume 5, Issue 3,March 2015 [3] M. Thomas (Ed) "Solar Electricity", John Wiley and Sons Ltd, Chichester, 2nd Edition. (2004). [4] U.K Mehta. "Principle of Electronics", S. Chand &Company Ltd. New Delhi. (2004), Technical brief onWind Electricity Generation:Retrieved fromwww.windpower.org. [5] Riad Chedid & Safur Rahman, ―Unit Sizing andControl of Hybrid Wind Solar Power System, IEEE Transaction of Energy Con version, Vol. 12, No. 1, pp. 181-195, March 1997.

Title	::	Web App Based Interactive Library Management System
Country	::	India
Authors	::	Tushar Gawhale || Hemangee Joshi || Sayali Ramane || Sonali Yewale || Prof. Reena Somani
Page	::	76-79

As the number of documents in digital library grows, it becomes increasingly difficult to store, manage the large amount of documents and find requested relevant documents by users. A Web App based Library management System helps to create unlimited quantity of digital information and make it available to the world in parallel. The scope of this software application is to generate the automatic process of manual handling of Library records and to handle the stock as well as book issues related information. Maintaining records of application for estates, the annual system is too complex and cumbersome. Since time and resources available we have been proposed to develop an inventory system. The development platform and software tool were identified as Visual Studio 17 and access of database..

 

Keywords - LMS, Web App, Mobile App, Web API, Chatbot, OPAC, Barcode Scanner.

[1] R. Dinesh et al, International Journal of Computer Science and Mobile Computing, Vol.4 Issue.3, March- 2015, pg. 142-149. [ISSN 2320–088X]. [2] International Journal on Recent and Innovation Trends in Computing and Communication Volume: 4 Issue: 4. [ISSN: 2321-8169 890 – 893]. [3] 2012 Fourth International Conference on Multimedia Information Networking and Security. [ISSN: 2162-8998]. [4] Ian, H., Witten, Rodger J. McNab, Stefan J. Boddie and David Bainbridge, 2000. Greenstone: A comprehensive open-source digital library software system. Proceedings of the 5'b ACM Conference on Digital Libraries. [5] Serge Abiteboul, 1997. Querying semi-structured data. Proceedings of the 6th International Conference on Database Theory

Title	::	Alumni Tracking System
Country	::	India
Authors	::	MihirJayavant || Shashank Kawle || PritiKhergamkar || ShitalGurale || Prof. Reena Somani
Page	::	80-86

Aluni Tracking System is an online-based application that helps to enhance the tracking of college graduates. The project primarily aims to replace current tracking procedure of college graduates and providing alumni data to college faculties. It aims at developing a mobile application and web portal which will be useful for the college to monitor the alumni's and for the alumni to update their current status and get notified about the college activities. ASP.NET Core Web API will be used to provide back-end service

 

Keywords - alumni-tracking, web-portal, mobile application, chat-bot

[1] Xuan Truong Vu*, Marie-Helen Abel, Pierre Morizet – Mahaoudeaux "A user – centered and group based approach for social data filtering and sharing". [2] R. Hobbs. 2002 From question – answering to information – seeking dialogs [3] A. C. Z. Lousada and G. d. A. Martins, "Alumni as a source of information to management accounting courses (in portuguese)," Journal of Accounting and Finance, vol. 16, no. 37, pp. 73–84, 2005. [4] N. B. Ellison et al., "Social network sites: Definition, history, and scholarship," Journal of Computer-Mediated Communication, vol. 13, no. 1, pp. 210–230, 2007. [5] M. D. Pena, "Alumni monitoring: Conceptual analysis and its application in brazilian educational context (in portuguese)," Technological Education of Belo Horizonte, vol. 5, no. 2, pp. 25–30, 2000..

Title	::	Intelligent Safety Helmet System
Country	::	India
Authors	::	Mansi Patil || Roshni Mudradi || Komal Kadam || Vineet Sharma || Ameya Jadhav
Page	::	87-91

This project is designed as the bikers in our country are increasing, the road mishaps are also increasing day by day, due to which many casualties, most of them are caused due to most common negligence of not wearing the helmets, and also many deaths occur due to lack of prompt medical attention needed by the injured person. This increase trend in accident motivated us to think about making a system which ensures the safety of biker, by making it necessary to wear helmet, as per government guidelines, also to get proper and prompt medical attention, after meeting with an accident. The proposed system is an intelligent helmet. A module affixed in the helmet is such that, the module will synchronize with the module affixed on bike and will also ensure and check that biker has not consumed alcohol. The accident detection module is an additional feature which will be installed on the bike, which will be able to detect accident and will be able to notify quickly the accident to police control room and in case if the accident is minor, rider can abort message sending by pressing the abort switch .The main objective of the smart helmet is to provide safety for rider . This implement by using advance feature due to late medical help or the accident place is unmanned.[1]

 

Keywords - Alcohol,Casualities,Helmet,Module,Police

[1] Jennifer William, Kaustubh Padwal, Nexon Samuel, Akshay Bawkar, SmitaRukhande,IntelligentHelmet,International Journal of Scientific & Engineering Research,Volume 7, Issue 3, March-2016. [2] Aviral Vijay, Ajay Singh, Bhanwar Veer Singh, Abhimanyu Yadav, Blessy Varghese and Ankit Vijay,Hi-tech Helmet and Accidental Free Transportation System,International Journal of Advanced Technology and Engineering Exploration,Volume-2 Issue-6 May-2015. [3] Nayan Ramteke,Shilpa Patil,, Mayur Deshmukh, Roshani Yelekar,IMPLEMENTATION OF SMART HELMET SYSTEM FOR BIKE WITH SPEED INDICATION TO GOVERNMENT,International Journal of Research In Science & Engineering,Special Issue 6-ICRTEST January 2017. [4] Ms.Anuradha.A.Nirmal, Ms.Vijayalaxmi B.Patil , Ms.Amruta S.Digraje , Ms.Supriya S.Gondkar,Smart Automation in Textile for Fault Detection & Salary Calculation,International Journal of Engineering Research in Electronics and Communication Engineering,Volume 4 ,February 2017. [5] Nitin Agarwal, Anshul Kumar Singh, Pushpendra Pratap Singh, Rajesh Sahani,SMART HELMET,International Research Journal of Engineering and Technology (IRJET),Volume: 02Issue: 02 May-2015..