In this paper we are proposing an image retrieval method based on feature similarity score fusion using motley genetic Algorithm and chaotic fuzzy logic. Single feature always describes image content onlyin one point of view, which has a certain one-sided effect. System's retrieval performance will improve by fusing multifeature similarity score. In this paper, method of fusing multi-feature similarity score is described by analyzing the retrieval results from colour feature, texture feature and size. For assigning the fusion weights of multi-feature similarity scores reasonably, the motley genetic algorithm using chaotic fuzzy logic is applied.

Keywords: content based image retrieval, similarity score fusion, fuzzy logic, fusion weight, chaotic genetic algorithm.

[1]. Suresh, M. B., and B. Mohankumar Naik. "An Efficient Approach of Content Based Image Retrieval using Texture, Colour and Shape Features of an Image". International Journal of Engineering Trends and Technology (IJETT), Volume-48 Number-6, 2017.
[2]. Wang, Xiang-Yang, Bei-Bei Zhang, and Hong-Ying Yang. "Content-based image retrieval by integrating colour and texture features." Multimedia tools and applications 68, no. 3 (2014): 545-569.
[3]. Ismail, Mohamed Maher Ben. "A Survey on Content-based Image Retrieval." (IJACSA) International Journal of Advanced Computer Science and Applications, Vol. 8, No. 5, 2017.
[4]. Ligade, Anita Nanasaheb, and Manisha R. Patil. "Optimized Content Based Image Retrieval Using Genetic Algorithm with Relevance Feedback Technique." International Journal of Computer Science Engineering and Information Technology Research (IJCSEITR) (2013): 49-54.
[5]. Chen, Mianshu, Yuan Sun, Ping Fu, and Hui Zhang. "Image retrieval based on multi-feature similarity score fusion using genetic algorithm." In Computer and Automation Engineering (ICCAE), 2010 the 2nd International Conference on, vol. 2, pp. 45-49. IEEE, 2010.

People are careless about their health management due to heavy workload and financial issues which becomes a major factor causing various health issues. This project is based on Internet of Things (IoT) which aims to provide real time health monitoring for such people with ease and better facilities. This system measures Body temperature, Pulse rate, Pulse oximetry (SpO2) and Electrocardiogram (ECG) using respective sensors which are interfaced with controller Arduino Uno. These sensor readings are sent wirelessly to the cloud over the internet using ESP8266. ThingSpeak, IOTGeek, etc. are various IoT cloud platforms available on which the readings are displayed, visualized and stored securely. In this way, medical records are stored digitally and is easily accessed and analysed by the patient and the doctor remotely from any part of the world regardless of place, time and device. SMS/Mail alerts containing the patient information and location will be sent to the doctor during any critical condition.

[1] Shivam Gupta, Shivam Kashaudhan, Devesh Chandra Pandey, Prakhar Pratap Singh Gaur, 'An IoT Based Patient Health Monitoring System', Proceedings on 2018International Conference on Advances in Computing and Communication Engineering, ICACCE 2018, 2018, 1–7 <https://doi.org/10.1109/ICACCE.2018.844 1708>
[2] R. Kumar, Dr.M. Pallikonda Rajasekaran, 'Status Observing Method Using Internet of Things', ICCREST, E-ISSN :23 (2016),101– 4
[3] Madhu, Narasimha Rao Jasti, IoT BasedRemote Patient Health Monitoring System (Manhattan, Kansas: India, 2010 A, 2017)
[4] Patil, Shivleela, and Sanjay Pardeshi, 'Health Monitoring System Using IoT', IRJET, 2018, 1678–82
[5] Suresh, A, and R Shalika, 'ThingSpeak IoT- A Non-Invasive Bio-Signal Measurement Approach for Advanced Health Care Monitoring Using Wearable Sensors', International Journal of Scientific & Engineering Research, 8 (2017), 386–92

KERS is one of the applications of regenerative braking. Regenerative Braking converts some of the waste heat energy produced during braking into more useful form of energy with the help of MGU (Motor Generator Unit). The system stores the energy in a battery (after applying brakes) produced under breaking in a reservoir and then releases the stored energy under acceleration. The key purpose of the introduction is to significantly reuse the wasted energy in some application of cars. KERS is introduced to improve fuel efficiency of the engine. KERS is one of the applications of regenerative braking. Regenerative Braking converts some of the waste heat energy produced during braking into more useful form of energy with the help of MGU (Motor Generator Unit). The system stores the energy in a battery (after applying brakes) produced under breaking in a reservoir and then releases the stored energy under acceleration. The key purpose of the introduction is to significantly reuse the wasted energy in some application of cars. KERS is introduced to improve fuel efficiency of the engine.

[1]. Kinetic Energy Recovery System authored by Yohan Mistry, Prathamesh Kulkarni, Chirag Dave & Chinmay Pandya published in Volume 3 Issue 10.
[2]. Comparative Study on Various KERS Radhika Kapoor, C. Mallika Parveen, Member, IAENG Proceedings of the World Congress on Engineering 2013 Vol III, WCE 2013, July 3 - 5, 2013, London, U.K.
[3]. DESIGN AND ANALYSIS OF KINETIC ENERGY RECOVERY SYSTEM IN BICYCLES Sreevalsan S Menon, Sooraj M S, Sanjay Mohan, Rino Disney, Suneeth Sukumaran published in International Journal of Innovative Research in Science, Engineering and Technology Vol. 2, Issue 8, August 2013.
[4]. Kinetic Energy Recovery System by Kawade Maleshwar Sopan, Supekar Pawan Ramrao, SingarAkshay Yashwant, Ippar Gokul Nivrutti, Dharam Santosh Arvind Published in International Research Journal of Engineering and Technology (IRJET) Volume: 05 Issue: 02 | Feb-2018.

As we know that weighing processes is very important part of any process industry. For transmitting the weighing information from the factory to plant control system (PLC/SCADA/DCS) nowday'swe are using either Analog signals (0-10Vdc/4-20mA) or Digital communication protocols like Ether CAT /PROFINET/Modbus RTU etc. by interface through the RS485/RS232/CAN/etc. So in thisprojectwetry to do something new. Approximately we all are aware the Ethernet which is dominantly accepted by the people for high speed communication. Ethernet globally free that's why it is fast gaining popularity in the shop floor with different device being introduce by vendors. Basically.........

[1]. Datasheet: 32-bit ARM cortexM3 microcontroller; up to 512kb flash and 64 kb SRAM with Ethernet ,US.0Host/device/OTG,CAN. LPC1769. Rev.04-1February2010.
[2]. Datasheet:24-bit delta-sigma ADC with ultra-low noise PGIA.CS5532-BS.
[3]. Datasheet: 12-Bit Rail-to-Rail Micro-power DACs in SO-8. LTC1453
[4]. Datasheet: Dual Monolithic 1.4A StepDown Switching Regulator, LT3508
[5]. Link: "Sensors - May 2000 - Getting the Most out of Strain Gauge Load Cells". archives.sensorsmag.com.
[6]. Retrieved 2018-03-15.

Urbanization and Industrialization are a main impetus for a nation's development. Industrialization requires good amount of area and this can be achieved at the cost of deforestation, contamination, corruption of nature and living beings. We need to discover elective approaches to satisfy the demands. One of the conceivable answers to maintain a strategic distance from these issues is the usage of a framework that utilizes an inexhaustible wellspring of vitality to fill diverse needs. This venture therefore aims at developing a system called "Artificial Solar Oxygen Tree". It fundamentally utilizes an electrolysis pack to create oxygen artificially. The voltage requiredfor the electrolysis to take place............

[1] 'Artificial Solar Oxygen Tree' by Ms. P. S. Deshmukh, Ms. P. P. Pawar, Ms. M. H. Chavan, Mr. S. B. Jadhav, Prof. P.D. Desai, Prof. V. V. Jadhav.
International Conference on Recent Innovations in Science, Engineering and Management-2018 ISBN No.: 978-93-87793-02-06 Volume 1 Page no. 560-569.
[2] 'Artificial Solar Oxygen Tree' by Rashmi Saratkar, Dr. S. D Bobade. International Journal of Advance Research, Ideas and Innovations in Technology- 2017. ISSN: 2454-132X Volume 3, Issue 6 Page no.: 899-903.

The "PIEZOELECTRIC SENSOR" ,which on applying a pressure will generate power[1,2]. Using that sensor along with other electronic circuitry we'll make a system that fits under the sole of your shoes while you walk, your feet applies some pressure on the sensor in return the sensor produces power which can either be used instantly or can be stored in a battery. This system of ours can also be used in the areas like railway station where the crowd is so huge. We can implant the same sensor and system under the stairs of the bridge people uses to cross one platform to the other. In this case power generation is large enough to light up the whole station.

[1]. International Journal For Technological Research In Engineering Volume 4, Issue 1, September-2016
[2]. P. D. Mitcheson, E. M. Yeatman, G. K. Rao, A. S. Holmes, and T. C. Green, "Energy harvesting from human and machine motion for wireless electronic devices," Proc. IEEE, vol. 96, no. 9, pp. 1457–1486, 2008.
[3]. https://en.m.Wikipedia.org/wiki/electricity_generation
[4]. https://google.co.in/piezoelectric.jpg
[5]. www.instructables.com/electric_generating_shoes

Agricultural Robot or agribot is a robot designed for agricultural purposes. Irrigation robot, driverless tractor / sprayer, and agrorobots are deployed to replace human labour. Robots can be used for other horticultural tasks such as pruning, weeding, spraying and monitoring. Robots can also be used in livestock applications (livestock robotics) such as automatic milking, washing and castrating. Robots like these have many benefits for the agricultural industry, including a higher quality of fresh produce, lower production costs, and a smaller need for manual labour. The designed robotic vehicle is a machine of a considerable power with multipurpose system which gives an advanced method to seed sowing, ploughing, watering the crops and harvesting with minimum man power and labour making it an efficient vehicle. The machine will cultivate the farm. Moreover the vehicle can be controlled through Bluetooth medium using an Android smart phone. The whole process calculation, processing, monitoring are designed with motors and interfaced with Microcontroller

Keywords: agribot, agrobot, irrigation vehicle, sowing, ploughing, harvesting, water spraying

[1]. Agricultural Robotics: A Streamlined Approach to Realization of Autonomous Farming H.Pota ,R.Eaton , J.Katupitiya , S.D.Pathirana School of Information Tech and Electronic Engineering, Australian Defense Force Academy, Canberra , Australia
[2]. Advanced Robotic Weeding System byAjit G Deshmukh& V.A. Kulkarni Jawaherlal Neharu Engineering College, Aurangabad, Maharashtra, INDIA.

The "PIEZOELECTRIC SENSOR" ,which on applying a pressure will generate power[1,2]. Using that sensor along with other electronic circuitry we'll make a system that fits under the sole of your shoes while you walk, your feet applies some pressure on the sensor in return the sensor produces power which can either be used instantly or can be stored in a battery. This system of ours can also be used in the areas like railway station where the crowd is so huge. We can implant the same sensor and system under the stairs of the bridge people uses to cross one platform to the other. In this case power generation is large enough to light up the whole station.

[1]. International Journal For Technological Research In Engineering Volume 4, Issue 1, September-2016
[2]. P. D. Mitcheson, E. M. Yeatman, G. K. Rao, A. S. Holmes, and T. C. Green, "Energy harvesting from human and machine motion for wireless electronic devices," Proc. IEEE, vol. 96, no. 9, pp. 1457–1486, 2008.
[3]. https://en.m.Wikipedia.org/wiki/electricity_generation
[4]. https://google.co.in/piezoelectric.jpg
[5]. www.instructables.com/electric_generating_shoes.

The purpose of this project is to reduce health issues of rag pickers due to harmful materials in waste.. Rag pickers have an illness due to infection of skin, respiratory system, gastrointestinal tract and other allergic disorders. In this project waste is mainly segregated into three categories that are metal,light and high weighted waste by using Microcontroller AT89S52. This system utilizes low cost components for the successful segregation of most types of waste. When installed in industries, it proves to be beneficial in sorting the waste at the site of disposal itself. The occupational hazard for rag pickers is reduced. Also the segregated waste can be directly sent to recycle.

Keywords- Automatic waste segregator, Conveyor belt, Sensors, LCD, GSM

[1]. Shanjenbam Brojendro Singh, Abu Salah Muslaha Uddin Laskar, Biltu Roy,(2016) "Design of Municipal Dry Waste Segregating Machine Using Conveyor"
[2]. Aleena V.J., Kavya Balakrishnan, Rosmi T.B.,(2016)"Automatic Waste Segregator and Monitoring System"
[3]. Mrs. Kanchan Mahajan, Prof.J.S.Chitode, (2014)"Zig-Bee Based Waste Bin Monitoring

The power dissipation in standard CMOS circuit can be decreased through adiabatic technique. By adiabatic technique dissipation in PMOS network may bedecreased and a few of energy keep at load capacitance may be recycled rather than dissipated as heat. however the adiabatic technique is extremely passionate about parameter variation. With the assistance of MICROWIND simulations, the energy consumption is analyzed by variation of parameter. In analysis, 2 logic families, ECRL (Efficient Charge Recovery Logic) and PFAL (Positive Feedback adiabatic Logic) area unitcompared with standard CMOS logic for electrical converter NAND and NOR circuits. it's finding that adiabatic technique is sweet alternative for low power application in nominative frequency vary.

Keywords: Power Consumption in CMOS , Equivalent Circuits, Four Phased Power Clock, Adiabatic Technique.

[1]. B.DilipKumarandM.Bharathi,"DesignofEnergyEfficientArithmeticCircuitsusingChargeRecoveryAdiabaticLogic",InternationalJour nalOfEngg.TrendsandTechnology,Vol.4,Issue-1,2013.
[2]. P.Teichmann,"FundamentalsofAdiabaticLogics",lectureonAdiabaticLogic,SpringerSeriesinAdvancedMicroelectronics34,2012.
[3]. JianpingHUandQiChen,"ModellingandNear-ThresholdComputingofPower- GatingAdiabaticLogicCircuit",Electricalreview,ISSN,2012.
[4]. NazrulAnvar,ToshikazuSekine,"FundamentalLogicbasedonTwoPhasedClockedAdiabaticStaticCMOSLogic",IEEEjournalofSemico nductorTechnologyandScience,Vol.10,No.1,2009.
[5]. LaszloVarga,FrenceKovacs,GaborHosszu,"AnEfficientAdiabaticChargeRecoveryLogic",IEEEpapers,2001

In the present day speech signal process has a very big selection of applications in several technical fields like human laptop interaction, biometrics, computing etc. In speech processing emotion recognition is major research area where different emotions of people are recognized in this paper the proposed system allows recognizing a person's emotional state from audio signals. The projected solution is aimed toward raising the interaction among humans and computers, therefore permitting effective human-computer intelligent interaction. The system is in a position to acknowledge six emotions (anger, boredom, disgust, fear, happiness and sadness). This set of emotional states is wide used for emotion recognition functions. It conjointly distinguishes one feeling versus all the opposite potential ones, as tried within the projected numerical results. The system consists of 2 subsystems specifically feeling recognition (ER) Gender recognition (GR).For this two support vector machines (SVMS) are used for the male and female speaker emotion recognition.

[1]. Kamran Soltani and Raja Noor Ainon. Speech emotion detection based on neural networks. In 9th International Symposium on Signal Processing and its Applications, 1 4244-0779-6/07, IEEE, 2007.
[2]. Jouni Pohjalainen and Paavo Alku. Multi-scale modulation filtering in automatic detection of emotions in telephone speech. International Conference on Acoustic, Speech and Signal Processing, 980-984, 2014.
[3]. https://www.irjet.net/archives/V3/i4/IRJET-V3I460.pdf
[4]. http://www.ijesit.com/Volume
[5]. https://www.sciencedirect.com/science/article/pii/S089360801730059X

Smart metering and power line communication can give nitty gritty data of vitality utilization designs and insightful controlling to apparatuses at home. We propose a home energy management system (HEMS) based on power line communication that can give simple to-get to data on home vitality utilization progressively, astute getting ready for controlling apparatuses, and enhancement of intensity utilization at home. The HEMS consists of three modules: an advanced power control planning engine, a device control module, and a power resource management server. Our model framework diminishes the expense of intensity utilization by around 10 percent.

Keywords: power line carrier communication, KQ330, energy measurements by voltage divider

[1] Cynthujah Vivekananthan, Student Member, IEEE, Yateendra Mishra, Member, IEEE, and Fangxing Li, Senior Member, IEEE," Real-Time Price Based Home Energy Management Scheduler," IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 30, NO. 4, JULY 2015.
[2] Mario Collotta, Member, IEEE, and Giovanni Pau," A Novel Energy Management Approach for Smart Homes using Bluetooth Low Energy," IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 0, NO. 0, SEPTEMBER 2015.
[3] Mingfu Li and Hung-Ju Lin," Design and Implementation of Smart Home Control Systems Based on Wireless Sensor Networks and Power Line Communications," IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 62, NO. 7, JULY 2015.
[4] Dhinakar P1, John Clement Sunder A2, Ramesh S M3, Vignesh Kirubaharan D4," Load Measurement in Home Energy Management System with Demand Response," International Advanced Research Journal of Science, Engineering and Technology Vol. 1, Issue 3, November 2014

The projected solution is aimed toward raising the interaction among humans and computers, therefore permitting effective human-computer intelligent interaction. The system is in a position to acknowledge six emotions (anger, boredom, disgust, fear, happiness and sadness). This set of emotional states is wide used for emotion recognition functions. In this paper we present the design of an artificially intelligent system capable of emotion recognition trough facial expressions. Three promising neural net-work architectures are customized, trained, and subjected to various classification tasks, after which the best performing network is further optimized. This paper analyzes the strengths and the limitations of systems based only on facial expressions or acoustic information.

[1]. Kamran Soltani and Raja Noor Ainon. Speech emotion detection based on neural networks. In 9th International Symposium on Signal Processing and its Applications, 1 4244-0779-6/07, IEEE, 2007.
[2]. Jouni Pohjalainen and Paavo Alku. Multi-scale modulation filtering in automatic detection of emotions in telephone speech. International Conference on Acoustic, Speech and Signal Processing, 980-984, 2014.
[3]. https://www.irjet.net/archives/V3/i4/IRJET-V3I460.pdf
[4]. http://www.ijesit.com/Volume
[5]. https://www.sciencedirect.com/science/article/pii/S089360801730059X
[6]. TFlearn. T earn: Deep learning library featuring a higher-level api for tensorflow. URL http://tflearn.org/.

RFID based programmed apportion framework is a methodology in open circulation framework helpful for increasingly productive, precise and robotized system of proportion conveyance. The regular apportion dissemination framework has downsides like incorrect amount of merchandise, low preparing pace, huge holding up time and material robbery in proportion shop. The proposed programmed apportion look for open appropriation framework depends on Radio Frequency Identification (RFID) innovation that replaces customary proportion cards. The RFID labels are given rather than regular proportion cards. Customer's database is put away in miniaturized scale controller which.............

Keywords- RFID Reader, GSM, Customer database, PDS, AT-MEGA328

[1] Dhanashri Pingale, Sonali Patil, Nishigandha Gadakh, Reena Avhad, Gundal S.S "Web Enabled Ration Distribution and Corruption Controlling System", International Journal of Engineering and Innovative Technology (IJEIT), Volume Issue 8, February 2013.
[2] Shivbhakt mhalsakant Hanmant, Suraj V.S, Moresh Mukhedkar, "Automization of Rationing System", International Journal of Computational Engineering and Management (IJCEM), Volume 7, Issue 6, November 2014.
[3] https://www.onlinejournal.in/IJIRV3I12/010.pdf
[4] http://www.ijsrp.org/research-paper-0415/ijsrp-p4058.pdf

A Floating point unit colloquially a math processor, is specifically designed to carry out operations on floating point numbers .For single precision itself more than 32 operations are possible. This paper deals with high speed ASIC implementation of single precision(32-bit) FP-ALU which performs add, subtract AND and OR operations using Verilog HDL language according to IEEE -754 standard . The delay parameter of simple Add operation is checked with RCA and CLA using Xilinx 14.7 ISE. The block diagram schematics are also viewed in Ni Multisim 14.0 software.

Keywords: CLA, RCA, FPU, Xilinx, Verilog, IEEE-754,Ni Multisim.

[1]. Nisha Singh, R Dhanabal et al "Design Of Single Precision Floating Point Arithmetic Logic Unit"2018,IEEE.
[2]. Milind Shirke, Sajish Chandrababu, Yogindra Abhyanka et al "Implementation Of IEEE754 Compliant Single Precision Floating Point-Adder Unit Supporting Denormal Inputs On Xilinx FPGA."IEEE International Conference on Power, Control, Signals and Instrumentation Engineering(ICPCSI-2017).
[3]. Aditi Sharma, Sukanya Singh, Abhay Sharma, et al "Implementation Of Single Precision Conventional And Fused Floating Point Fused Add-Sub Unit Using Verilog"IEEE WiSPNET 2017 Conference.
[4]. Sangeeta Palekar, Nitin Narkhede et al "High Speed And Area Efficient Single Precision Floating Point Arithmetic Unit" ,IEEE International Conference on recent trends in Electronics Information Communication Technology ,May 20-21,2016.
[5]. Jenil Jain, Rahul Agrawal et al "Design And Development Of Efficient Reversible Floating Point Arithmetic Unit",IEEE 2015 Fifth International Conference On Communication Systems And Network Technologies

Emotions play a very important role in our day to day life. Emotions are the natural physiological response of the human body which can be recognized by the facial expression. In the proposed system research has been done in the field of Human Computer Interaction(HCI). The entire project is divided into three major steps i.e. Face detection, facial feature extraction and classification..

[1]. Mart´ın Abadi, Ashish Agarwal, et al: TensorFlow: Large-Scale Machine Learning on Heterogeneous Distributed Systems. CoRR abs/1603.04467 (2016)
[2]. Lu Guanming, Shi Wanwan, Li Xu, et al: A kind of convolution neural network for facialexpression recognition [J]. Journal of Nanjing University of Posts and Telecommunications (NATURAL SCIENCE EDITION). 2016 (01)
[3]. Abhineet Saxena: Convolutional neural networks: an illustration in TensorFlow. ACMCrossroads 22(4): 56-58 (2016)
[4]. Bo-Kyeong Kim, Jihyeon Roh, Suh-Yeon Dong, Soo-Young Lee: Hierarchical committee of deep convolutional neural networks for robust facial expression recognition. J Multimodal

An overview of the roadand traffic sign detection and recognition with the SMS alert system when an accident occurred . Road sign detection and recognition technique is important to support a driver. Failure detection by the driver of any traffic sign may increase accident risk significantly The time between an accident occurrence and the emergency medical personnel are dispatched to the accident location is the important factor in the survival rates after an accident..........

Keywords- Digital Image Processing, Traffic Sign Detection, Arduino , GSM, GPS, LCD, MEMS.

[1]. Andreas Møgelmose, Mohan ManubhaiTrivedi, and Thomas B. Moeslund," Vision-Based Traffic Sign Detection and Analysis for Intelligent Driver Assistance Systems: Perspectives and Survey", IEEE Transactions On Intelligent Transportation Systems,vol. 13, NO. 4, pp.1484-1497, December 2012.
[2]. Ahmed Hechri and AbdellatifMtibaa," Lanes and Road Signs Recognition for Driver Assistance System", IJCSI International Journal of Cmputer Science Issues, Vol. 8, Issue 6, No 1,November 2011 ISSN (Online): 1694- 0814.
[3]. P.Jyothi, G. Harish. Design and Implementation of Real time vehicle Monitering, Tracking and Controlling System, IEEE
[4]. R. Kumar, H.Kumar, "‟Availability and handling of data Recieved through GPS device; in tracking a vehicle", Advanced Computing Conference(IACC) 2014, IEEE International
[5]. A. Ruta, Y. M. Li, and X. H. Liu, "Detection, tracking and recognition of traffic signs from video input," in Proceedings of the 11th International IEEE Conference on Intelligent Transportation Systems (ITSC '08), pp. 55–60, IEEE, Beijing, China, December 2008.