Paper Type	::	Research Paper
Title	::	Analysis of Flat Belt Conveyor Shaft Failure
Country	::	India
Authors	::	S.B.Pawar || V.A.Ugalmugale || A.R.Ubale || G.S.Gaikwad || A.A.Tanmor || V.S.Karanjule
Page No.	::	01-03

The shafts which are used for transmission of power or torque between two moving elements of machines which are used in different applications in our industries and day to day life, to give an overview on the various possible types of failures of shafts and identifying reason of their failures. For this purpose some papers on failure of shafts have been reviewed in which mechanical properties, material structure, design and various methods of stress analysis have been considered as the primary parameters for their study. The objective of present work is to study various methodologies used for the shaft failure analysis and to choose best methodology which are suitable for the failure analysis of shaft used in conveyor belt for material handling.

Keyword :conveyor shafts, finite element analysis, failure analysis, fatigue testing.

[1]. Devendra Kumar, R.K. Mandloi "Analysis & Prospects ofModification in Belt Conveyors - A Review" IJERA Vol. 3,Issue 1, January -February 2013, pp.581-587.
[2]. VINOD M. BANSODE, ABHAY A. UTPAT "Fatigue Life Prediction of A Butt Weld Joint In A Drum Pulley Assembly Using Non-Linear Static Structural Analysis" Dept. of Mechanical Engineering, College of Engineering, Pandharpur,India.
[3]. X. Oscar fenn Daniel, A. Hussain lal "Stress Analysis in Pulleyof Stacker-Reclaimer by Using Fem Vs Analytical"Department of Mechanical Engineering, JJ College ofEngineering and Technology, Tiruchirappalli. IOSR Journalof Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN:2278-1684, p-ISSN: 2320-334X PP 52-59.
[4]. Gys van Zyl, Abdulmohsin Al-Sahli "Failure analysis ofconveyor pulley shaft" Materials and Corrosion Section,SABIC T&I, Jubail, Saudi Arabia ,Received in revised form 27 APRIL 2013.
[5]. Vinit Sethi and Lawrence K. Nordell "Modern Pulley DesignTechniques and Failure Analysis Methods" conveyorDynamics, Inc.1111 West Holly Street Bellingham, WA98225.

Paper Type	::	Research Paper
Title	::	Design and Modification of Cam Operated Spring-less Valve System in IC Engine
Country	::	India
Authors	::	D. V. Bhise || Aishwarya R. Kulkarni || Omkar S. Khaire || Prasad S. Darekar || Shubham R. Kochale || Sunny R. Dhadve
Page No.	::	04-09

This project presents the spring less valve system used in the IC engines.This mechanism has a closing cam which does not allow cam jump as conventional valve system. It has helped us to find out how spring less valve system is better than conventional valve system. We have found out the real importance of this spring less system at higher rpm of engine and need of this system at higher rpm. This system improves the performance of IC engine by reducing power consumption for overcoming spring stiffness and avoid cam jump at high speed.

Keywords: Springless valve system, closing cam, cam jump, IC Engine, Stiffness

[1]. Kosuke Nagaya, Hiroyuki Kobayashi, Kazuya Koike,(2012),Valve Timing And Valve Lift Control Mechanism For Engines Department Of Mechanical Engineering, Gunma University, Japan, [pp 2-5]
[2]. G. Dalpiaz, A. Rivola, Non-Linear Elastodynamic Model of a Valve Train, (2014), International Journal Of Engineering Research &Technology [pp 5-11]
[3]. JieGuo Wenping Zhang, Dequan Zou,(2012),Investigation of dynamic characteristics of a valve train system, National School of Engineers of Sfax TUNISIA [pp 3-8]
[4]. 4.Rivola,M.Troncossi,G.Dalpiaz,A.Carlini.(2016),Elastodynamic analysis of the desmodromic valve train of a racing motorbike engine by means of a combined lumped/finite element model.[pp 4-8]
[5]. Design of Machinery, Chapter 8, Cam Design.[pp 432-556 ]
[6]. Khurmi and Gupta,Theory of Machines.[pp 774-832 ]

Paper Type	::	Research Paper
Title	::	Design and Development of Prototype for Floor Cleaning of Car
Country	::	India
Authors	::	Prof. S.B. Pawar || Pavan S. Sonawane || Nilesh K. Sonawane || William P. Rathod || Rakshit Vakhariya
Page No.	::	10-14

Design and development of car does not just include design and manufacturing of mechanical parts like engine, transmission , chassis , but also non technical aspects are important such as comfort, Ambient (Atmosphere) , ease of control , cleanliness ,Ergonomics and Aesthetics. Humans spend too much time in the car and if there are any dust and dirt particles it makes the environment unpleasant causing distress. And to keep the car clean is essential for a long time The project includes prototype for Automatic floor cleaning of car. The system routinely cleans the floor are of the car before an after use or on passengers demand. It consists of a mechanism using XY plotters, servo motors ,vacuum pump, servo motor shield for controlling the prototype. Market survey was done for studying various methods used by the car detailing shops in India. The current methods costs a lot more for a period of 5 years. A prototype was developed to reduce the cost required as well as the human effort needed

Keywords: Stepper motors, Rubber bush, Arduino UNO ,Stepper motor Shield , GT2 belt, M10 threaded rods, 12v battery

[1]. International journals-[1] F.H.Loo, W.M.Ng, R.Hamzah, A.Farhana,"Design and Development of XY Plotter"2nd Integrated Design Project Conference (IDPC) 2015,
[2]. Mrs. R. Dayana, Gunaseelan P, "Microcontroller Based X-Y Plotter" InternationalJournal of Advanced Research in Electrical, Electronics and InstrumentationEngineering, 2014
[3]. Mane Rajashri Anil, Dange Aishwarya Ganpati, MRS. J. M.Waykule, "X-Y Plotter"International Journal of Engineering Technology Science and Research IJETSR,2017
[4]. Mohd Ashiq Kamaril Yusoffa , Reza Ezuan Saminb, Babul Salam KaderIbrahimc"Wireless Mobile Robotic Arm" International Symposium on Robotics andIntelligent Sensors 2012 (IRIS 2012)
[5]. Dr. Bindu A Thomas, Stafford Michahial, Shreeraksha.P, Vijayashri B Nagvi, SureshM, "Industry Based Automatic Robotic Arm", International Journal of Engineering andInnovative Technology (IJEIT)

Paper Type	::	Research Paper
Title	::	Design and Development of Leak Testing Machine for TConnectors
Country	::	India
Authors	::	Dr. Satish R. More || Sanket S. Nikam || Sanket S. Mulik || Mohsin Z. Naik || Ganesh G. Pandhare
Page No.	::	15-22

The present work is focused on 'Design and Development of Dry Leak Testing Machine'. Proper selection and implementation of a product leak test method starts with an understanding the need of the test being performed, followed by establishing what the leak rate limit is, and finally a determination of how the leak test will be performed. The product to be tested is Quick connectors of hoses used in cooling system of the vehicles. The part will be tested as per given conditions of the automotive manufacturer. This machine is manufactured as per the customer's requirement and standard testing parameters. It is based on Fixture Technology with latch mechanism............

Keywords:cooling system of automotive, quick connectors, leak testing, dry leak testing, fixture, pneumatic circuit, Arduino.

[1]. T. Dragicevic, X. Lu, J. C. Vasquez, J. M. Guerrero (2016) DC Microgrids- Part I, Control Strategy & Stabilization, IEEE Trans. Power Electronics,Vol. 31,Issue: 7, pp. 4876-4891, October 2016.
[2]. J. Evertz, F. Krismer, J. V. Den keybus, J. Driesen, J. W. Kolar, Charge Based Switching Analysis dual active bridge AC-DC converter, IEEE Transaction on ECCE, pp. 4820-4829, June 2013.
[3]. S. Kulasekaran, R. Ayyanar, Analysis, design, and experimental results of the semidual-active-bridge converter, IEEE Trans. Power Electronics, Vol. 29, No.10, pp. 5136-5147, Oct 2014
[4]. Z. Pavlovic, J. A. Oliver, P. Alou, O. Garcia, J. Cobos, "Bidirectional dual active bridge series resonant converter with pulse modulation", IEEE Transaction on APEC, pp. 503-508, July 2012.
[5]. F. M. Ibanez, J. M. Echeverria, J. Vadillo , L. Fontan, A step-up bidirectional series resonant DC/DC converter using a continuous current mode ,IEEE Trans. Power Electronics, Vol. 30, No.3,pp. 1393-1402, Mar. 2015.

Paper Type	::	Research Paper
Title	::	Heat Transfer Analysis Using Synthetic Jet
Country	::	India
Authors	::	M.S.Deokar || Harshad S. Pawar || Saurabh S. Mahajan || Sagar A. Kille
Page No.	::	23-29

The focus of this project is to experimentally analyse heat transfer rate of a synthetic jet using different orifice shapes having same hydraulic diameter. We use three different orifice shape to analyse the heat transfer rate by using synthetic jet. In this study we use orifice shape circular, square and oval . The properties of synthetic jet for three different orifice shapes are studied for the constant frequency at different heights. The heat transfer rate depends upon the velocity of synthetic jet which in terms depend upon the frequency of synthetic jet producing device. In this study we found the heat transfer rate for circular, oval and square orifice. The maximum heat transfer rate was found at approximate height 60 mm for all three orifice shapes.After comparing the heat transfer rate of three orifice shape, circular orifice has the maximum heat transfer rate. As the height increases beyond or decreases below optimum height the heat transfer rate decreases.

Keywords: Orifice shapes, synthetic jet,

[1]. MangeshChaudhari, BalchandraPuranik, AmitAgarwal, "Heat Transfer Characteristics of Synthetic Jet Impingement Cooling", International Journal of Heat and Mass Transfer,2010,Vol.53, pp.1057-1069.
[2]. Ge, T.S., Dai, Y.J., Li,Y. and Wang, R.Z., Simulation investigation on solar powered desiccant coated heat exchanger cooling system, Applied Energy, 2012, Vol. 93, pp. 532-540.
[3]. Goldsworthy, M. and White, S., Optimisation of a desiccant cooling system design with indirect evaporative cooler, International Journal of refrigeration, 2011, Vol. 34, pp. 148-158.
[4]. Fong, K.F., Chow, T.T., Lin, Z. and Chan, L.S., "Simulation–optimization of solar – assisted desiccant cooling system for subtropical Hong Kong", Applied ThermalEngineering, 2010, Vol. 30, pp. 220-228.
[5]. Antonellis, S.D., Joppolo, C.M. and Molinaroli, L., Simulation, performance analysis and optimization of desiccant wheels, Energy and Buildings, 2010, Vol. 42, pp. 1386-1393.

Paper Type	::	Research Paper
Title	::	Experimental Investigation and Analysis of Heat Pipe Using Nano Fluid in Solar Water Heater System
Country	::	India
Authors	::	Rohit M.Rathod || Prashant A.Vikhe || Rohit R.Gharge || Manoj S.Sakhare || Shantanu A.Wagh
Page No.	::	30-33

An Solar energy conversion systems are facing the problem of having low optical and thermal performance. The reasons behind this arelow thermal conductivity of flowing fluid and non-effective optical coating of the solar collector. Henceour aim to improve the thermal and optical performance of the energy conversion systems. This project focuses on the application of nano-fluids for solar collectors operating in low, medium and high temperature ranges to increase its performance. A review on applications of nano- fluids and nanocomposites shows the desired improvement in thermal and optical properties of solar energy conversion systems.which includes use of concentrated and non-concentrated systems that convert solar energy into electricity or thermal power..............

[1]. Arun Kumar Tiwari, PradyumnaGhosh, JaharSarkar Solar waterheating using nanofluids -a comprehensive overview andenvironmental impact analysis.
[2]. Bhagavathi Shankar, Dr. A. Manivannan Performance Evaluation of Solar Water Heater UsingNanofluid.
[3]. Comparison of collectors K. Sivakumar, N. Krishna Mohan and B.Sivaraman (2011) "Performance analysis of elliptical heat pipe solar collector" Indian Journal of Science and Technology, Vol. 4 No. 1 (Jan 2011).
[4]. Dongsheng Wen, YulongDing Experimental investigation intoconvective heat transfer Ofnanofluids at the entrance region under Laminar flow conditions.
[5]. Eisenmann, K. Vajen 1, H. Ackermann, "On the correlations betweencollector efficiency factor and material content of parallel flow flat-plate solar collectors" Philips-University Marburg, FBPhysik,Renthof 5, D-35032 Marburg, Germany Solar Energy 76 (2004)381.

Paper Type	::	Research Paper
Title	::	Fabrication and Finite Element Analysis Of Wheel Hub
Country	::	India
Authors	::	Patil.Y.B || Patil.I.M. || Patil.J.K. || Chaudhari.H.C. || Kshirsagar.G.H.
Page No.	::	34-36

In this project various methodologies adopted by present researcher for analys is wheel hub and with main objective of analysis and optimization of the vehicle. This review will assist researchers working in the field of development of the structural design and mass reduction of Wheel Hub through optimization methods conducted by FEA software viz. Katia V5 R19 and Any's (workbench 16). The review includes key areas of researches as Weight optimization, static load analysis and fatigue load analysis using FEA. This literature progressively discusses about the research methodology, software's and the outcomes of the discussed researches and is intended to give a brief variety of the researches carried out on the wheel hub and upright assembly.

Keywords- Weight Optimization

[1]. Kaixian Yue, , "Statistical Analysis of the Accelerated Life Testing for Fighter-Bomber Wheel Hubs" 1-4244-2509-9/09/$20.00 ©2009 IEEE
[2]. M. Amura , L. Allegrucci, F. De Paolis, M. Bernabei, "Fatigue fracture of an AMX aircraft main wheel" , Science Direct Engineering Failure Analysis 27 (2013) 194–202
[3]. Kazem Reza Kashyzadeh, Mohammad Jafar Ostad-Ahmad-Ghorabi , Alireza Arghavan, "Fatigue life prediction of package of suspension automotive under random vibration based on road roughness" , Mediterranean Journal of Modeling and Simulation Med. J. Model. Simul. 04 (2015) 037- 050
[4]. J. Janardhan, V. Ravi Kumar, R. Lalitha Narayana , "Radial Fatigue Analysis of An Alloy Wheel" , Int. Journal of Engineering Research and Applications www.ijera.com ISSN : 2248-9622, Vol. 4, Issue 12( Part 6), December 2014, pp.253-258
[5]. Malapati.M, K V S Karthik , "Fatigue based Design and Validation of Automobile Wheel Hub" , International Journal of Engineering Technology Science and Research IJETSR www.ijetsr.com ISSN 2394 – 3386 Volume 4, Issue 11 November 2017

Paper Type	::	Research Paper
Title	::	Manufacturing of Composite Material
Country	::	India
Authors	::	Prof. R. M. Deshmukh || Prashant Kumbhar || Mahesh Shrimangale || Mehraj Sayyed || Nabharaj Sawant || Anup Surwase
Page No.	::	37-38

Now-a-days, the natural fibers from renewable natural resources offer the potential to act as a reinforcing material for polymer composites alternative to the use of glass, carbon and other man-made fibers. Among various fibers, jute is most widely used natural fiber due to its advantages like easy availability, low density, low production cost and satisfactory mechanical properties. A hybrid composite is a combination of two or more different types of fiber in which one type of fiber balance the deficiency of another fiber. As fiber reinforced laminated composite materials offer high specific strength and stiffness, they are greatly used in aircraft and wind turbine industries. The mechanical and thermal properties of the laminated composites vary based on the orientation of fibers and hence, they are treated as anisotropic materials.............

Keywords- Fiber, Composite, Lamina, Synthetic, Natural, Reinforce, Hybrid

[1]. Introducing composite lattice core sandwich structure as an alternative proposal for engine hood by Sha Yina,b,c , Haoyu Chena,b , Yaobo Wua,b , Yibing Lid , Jun Xua,b,c,d,⁎ a Department of Automotive Engineering, School of Transportation Science and Engineering, Beihang University, Beijing 100191, China
[2]. Mechanical Properties of Hybrid Glass/Carbon Fiber Reinforced Epoxy Composites P. M. Bhagwat a , M. Ramachandranb *, Pramod Raichurkara,b a Sharad Institute of Technology, Ichalkaranji, Maharashtra, India b,a,bMPSTME, SVKM'S NMIMS University, Dhule 425405, Maharashtra, India. Science direct Materials Today: Proceedings 4 (2017) 7375–7380
[3]. J. ARBAOUI in 2011 Mechanical Properties of Hybrid Glass/Carbon Fiber Reinforced Epoxy Composites
[4]. By l P.M.Bhagwata M.Ramachandran methodstody proceeding Volume 4, Issue 8, 2017, Pages 7375-7380

Paper Type	::	Research Paper
Title	::	Banana Fibre Extraction Machine
Country	::	India
Authors	::	Prof. Ashwin Kamble || Akshay Jadhav || Meet Patel || Ashish Lokhande || Pratiksha Shinde
Page No.	::	39-43

The aim of this project is to design and develop a process to extract high quality natural fibers from the banana pseudo stems. Manual extraction of banana fiber produces good quality of fiber but it much time consuming. Labour expense is quite high and output is quite low. Hence efficient extraction of banana fiber can only be possible through mechanization. Now a day's machines exist for extracting banana fiber but are manually operated and cannot be applied for mass production. This project is specially designed for extracting banana fibre from the banana stem. The machine is designed in a very simple way such that it can be used by everyone, as the mechanism is very simple. In this paper, extracted banana fiber (EBF) and waste banana..........

Keywords: blade, belt and pulley, motor, and roller shaft

[1]. R. Bhoopathi, M. Ramesh, C, "Fabrication and Property Evaluation of Banana-Hemp-Glass Fiber Reinforced Composites", ScienceDirect, Procedia Engineering 97 ( 2014 ) 2032 – 2041
[2]. K. L. Pickering, M.G.Aruan Efendy and T. M. Le, "A review of recent developments in natural fibre composites and their mechanical performance", Part A (2015), doi: http://dx.doi.org/10.1016/ j.compositesa.2015.08.038
[3]. William Jordan, Patrick Chester, "Improving the Properties of Banana Fiber Reinforced Polymeric Composites by Treating the Fibers", 3rd International Conference on Natural Fibers: Advanced Materials for a Greener World, ICNF 2017, 21-23 June 2017, Braga, Portugal
[4]. Zaida Ortega, Moisés Morón , Mario D. Monzón , Pere Badalló and Rubén Paz,, "Production of Banana Fiber Yarns for Technical Textile Reinforced Composites", Materials 2016, 9, 370; doi:10.3390/ma9050370 11 April 2016; Accepted: 9 May 2016; Published: 13 May 2016
[5]. Preethi P and Balakrishna Murthy G, "Physical and Chemical Properties of Banana Fibre Extracted from Commercial Banana Cultivars Grown in Tamilnadu State", Agrotechnol 2013, S11 http://dx.doi.org/10.4172/2168-9881.S11-008

Paper Type	::	Research Paper
Title	::	Design, Analysis & Development of (Prototype) Vertical Axis Wind Mill
Country	::	India
Authors	::	Pavan Puri || Bhushan Dhake || Abhishek Dhane || Sanjay Dafade || Amol khatik
Page No.	::	44-48

A vertical axis wind turbine (VAWT) is to convert wind power into the useful form of energy by turbine blade. The Vertical axis wind turbines are effective than horizontal axis wind turbines as they require less space than horizontal blades and the turbines does not need to be pointed in direction of the wind for effective output. This is useful in a site where the wind direction is highly variable. The Maglev Wind Turbine is expected to bring wind power technology to the next level. Furthermore, the system can be suited in use for rural and urban areas of low wind speed regions. The wind speeds in most of Asian zone is much lower, especially in the cities. The present day methods are not sufficient to keep pace with ever increasing demand. The recent severe energy crisis has forced to think & develop the power generation by renewable sources (mainly wind power). This system can also be implementing on the highway and rooftop of buildings. In this project study of alternate configuration of wind turbine for power generation purpose.

Keywords: Vertical axis wind turbine, Maglev wind turbine, Renewable energy sources, Wind power.

[1]. Micha Premkumar, Mohan ,Sarlathan Shivamani, "Design and Analysis of a Permanent Magnetic Bearing for Vertical Axis Small Wind Turbine", ScienceDirect, 4 March 2018, pp. 291-298.
[2]. Kung-Yen Lee, Shao-Hua Tsao, Chieh-Wen Tzeng, Huei-Jeng Lin, "Influence of the vertical wind and wind direction on the power output of a small vertical-axis wind turbine installed on the rooftop of a building", Applied Energy, 19 August 2017, pp. 0306-2619.
[3]. Wenlong Tian, Zhaoyong Mao, Xinyu An, Baoshou Zhang, Haibing Wen, "Numerical study of energy recovery from the wakes of moving vehicles on highways by using a vertical axis wind turbine", Applied Energy, 30 July 2017, pp. 31366.
[4]. Andrea Arena, Walter Lacarbonara, "On the stability of magnetically levitated rotating rings", ScienceDirect, 5 July 2017, pp. 286- 295.

Paper Type	::	Research Paper
Title	::	Design and Manufacturing of Go-Kart
Country	::	India
Authors	::	J.S.Gawande || Vishal Borhade || Shubham Amritkar
Page No.	::	49-55

This paper concentrate on explaining the design and engineering aspects of making a Go Kart for student karting championship. This report explains the objectives, assumptions and calculations made in designing a Go Kart. The team's primary objective is that to design a safe and functional vehicle based on rigid and torsion free frame. The design is chosen such that the Kart is easy to fabricate in every possible aspect. Go-Kart is small four-wheeled vehicle. The design report focuses on briefing the sole ideology behind the development of lightweight, compact, economical, durable and easy to manufacture GO-KART. The team's primary objective is to design safe and functional vehicle based on rigid and torsional free frame. Even in their most primitive form, go-karts may be adapted as transportation technology in developing countries to leverage economic growth and poverty alleviation.............

Keywords: Ergonomics, Design of chassis, Static analysis, Analysis of Go-Kart components,Selection of engine, Design of shaft , Brake system.

[1]. T. Anand Babu, D. Vijay Praveen, Dr. M. Venkateswarao, Crash Analysis Of Car Chassis Frame.
[2]. Using Finite Element Method, International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 8, October- 2012.
[3]. Pravin A. Renuke, Dynamic Analysis Of Car Chassis, International Journal of Engineering Research & Applications, Vol. 2, Issue 6, November-December 2012, pg.-955-959.
[4]. Nitin gokhale, Practical application of finite element simulation.
[5]. Jornsen Reimpell, Helmut Stoll, Dr. Jurgen W. Betzler, The Automotive Chassis: Engineering Principles (Second Edition), Society Of Automotive Engineers.

Paper Type	::	Research Paper
Title	::	Design & Analysis of Portable Shell Moulding Machine
Country	::	India
Authors	::	Shital.S. Bhosale || Akshay Sase || Krishna Sarode || Chinmay Sangam || Ravi Tripathi
Page No.	::	56-60

Shot Blasting machine use a various hanger during machining of various process, in this work its essential to increase production rate in RVM industry. For this its required to increase hanger capacity for the various castings used in the industry. To increase hanger capacity for number of casting its required to redesigned the hanger such a way that its capacity is maximum up to 300Kg of short blasting machine. With the study of shot blasting machine and its hanger we should have to design hanger as requirement

Keywords: Shot Blasting Machine, Shot Blasting Hanger Cost Reduction, Productivity Improvement,

[1]. .Mazhar Iqbal, Sushil Patel, Ganesh Vidyathee.
[2]. Shell mold Casting manufacture of complex parts with thin section.International Journal of Engineering Science and research technology.
[3]. 2)Shantanu Joshi, Prof. B.R. Jadhav
[4]. Casting defect reduction and productivity improvement in automotive component.International Journal forresearch in Applied science and Engineering Technology.
[5]. 3)Shruthi Y.C., Ramachandra C.G., Veerashekhar M.
[6]. Productivity Improvement of casting, switching to shell mould process from green sand mould process.International Journal of Research in Engineering and Technology.
[7]. 4)Amit M Joshi,Introduction to the shell moulding process.IIT Bombay.

Paper Type	::	Research Paper
Title	::	Design and Fabrication of Solar Dryer Powered By Forced Circulation by Using Reflective Mirror
Country	::	India
Authors	::	S.P.Kadu || Jadhao.H.M || Tarade.A.R || Kondubhairy.P.Y || Gurav.A.P
Page No.	::	61-64

An indirect forced convection with photovoltaic powered forced circulation solar dryer has been built and tested. The main parts are: a V -grooved solar air collector, a scrap freeze as drying chamber, a battery and PV panel. The system is operated in one mode, sunshine hours. Experiment were conducted on drying of ginger as drying of ginger is problem in north India and Mahatma Gandhi Institute for Rural Industrialization Wardha (MGIRI, A national institute under the ministry of MSME Government of India) asked to look into it and study the effect of drying as well the climatic and operational parameters on the dryer performance.

Keywords: Twisted tape, Turbulence, Heat exchanger, Forced Convection, Solar Module, Solar Radiation, PV Powered

[1]. Ayensu A.,"Dehydration of Food Crops Using Solar Dryer with Convective Heat Flow", Research of Department of Physics, 2000, University of Cape Coast, Ghana.
[2]. Dorf R.G. "Energy, Resources and Policy", Massachusetts, Addison Werley Publishing Company, 1989.
[3]. Fisk M.J. and Anderson H.C., "Introduction to Solar Technology", Massachusetts, 1993.
[4]. GEDA-Gujarat Energy Development Agency, 2003, http://www.geda.com/.
[5]. Herringshaw D., "All About Food Drying", 1997, The Ohio State University Extension Factsheet-hyg-5347-97, www.ag.ohiostate. edu/.

Paper Type	::	Research Paper
Title	::	Design Analysis of Turbo Charger
Country	::	India
Authors	::	R.P. Kattimani || Bhavesh Khairnar || Chirag Bhole || Lokesh Bhirud || Vijay Gadilohar
Page No.	::	65-68

The main goal of this analysis is to be style the rotary engine and mechanical device vane of a turbocharger for a diesel. it's to extend power and potency of a turbocharger. it's to usage of latest material is needed for associate investigation. the present work rotary engine and mechanical device vane has been designed with totally different materials. The investigation has been done by victimization ANSYS and CATIA code. The rotary engine and mechanical device vane modeling has been done by victimization CATIA code. The variation of stresses, strains and deformation profile of the rotary engine and mechanical device vane has been determined by victimization ANSYS code. The distinguishing the correct or exactdesign options, the extended service life and future stability has been assured...........

Keywords: Structural Analysis; Modal Analysis.

[1]. AjjarapuKishore,V.R.S.M.,K.V.P.P.Ch and D.M.Mohanthy Babu et.al., 2. ―Design and analysis of the impeller of a turbocharger‖
[2]. Al-Zubaidy S.N. et.al., ―A proposed design package for centrifugal impellers‖ Computers & Structures, Volume 55, Issue 2, 17 April (1995), Pages 347-356\
[3]. Gunter, E. G. and Chen, W. J., (2005), ―Dynamic Analysis of a Turbocharger in Floating Bushing Bearings,‖ Proc. 3rd International Symposium on Stability Control of Rotating
[4]. Holmes, R., Brennan, M. J. and Gottrand, B., (2004), ―Vibration of an Automotive Turbocharger– A Case Study,‖ Proc. 8th InternationalConference on Vibrations in Rotating Machinery, Swansea, UK, pp. 445-450
[5]. Ramamurti.V, D.A. Subramani, K. SridharaStresset.al., Analysis and Determination of eigen pairs of a typical turbocharger compressor‖ Mechanism and Machine Theory, Volume 30, Issue 4, May (1995), Pages 619-628

Paper Type	::	Research Paper
Title	::	Design and Fabrication of Solar Dryer Using Waste Metal Cans
Country	::	India
Authors	::	R.P.Kattimani || Ranjeet Shinde || Pravin Tode || Pravin Kharajge || Suraj Shinde
Page No.	::	69-73

The methods for heat transfer augmentation are relevant to several engineering applications. In recent years, the high cost of energy as well as material has resulted in an increased effort and aimed at producing more efficient heat exchange equipment. There is a necessity for minimization of a heat exchanger in specific applications, such as aerospace application, through an augmentation of heat transfer. For this purpose a pipe in pipe heat exchanger is used to improving the methods of heat exchange between two fluids which are at different temperatures..............

Keywords: Twisted tape, Turbulence, Heat exchanger

[1]. Design of machine elements, By V.B. Bhandari, Third Edition, Copyright 2010 (437-441).
[2]. Mechanical System Design, By R.B. Patil, First Edition (Chapter 7).
[3]. Engineering Composite Material, By Bryan Harris, The Institute of Materials, London 1999.
[4]. Structural Composite Materials, F.C. Campbell,Copyright © 2010, ASM International.
[5]. Assarudeen H, Anandkumar G "Structural Analysis Of Banana/E-Glass Woven Fiber Reinforced Epoxy Based Hybrid Composite On Mono Leaf Spring Using Fea" National Conference On Recent Trends And Developments In Sustainable Green Technologies Journal of Chemical and Pharmaceutical Science ISSN: 0974-2115

Paper Type	::	Research Paper
Title	::	Anti-Collision Car Side Mirror System
Country	::	India
Authors	::	AherK.M. || Baviskar H.C.
Page No.	::	74-83

In the current phase of the world, we see many automobiles running on the roads. Automobiles rule the roadways. But there are also many problems faced by the automobiles while actually dealing with many situations on roadside. One of the problems generally faced is by the side mirror of the vehicle. If the vehicle comes into the close distance between another vehicle, there may be the chances that the mirror of the vehicle crashes and gets damaged. The motive of our project is to avoid the damage to the side mirrors by use of some sensors and mechanisms. Method for the application of our system is to make use of ultrasonic sensors which control the movement of the motors attached to the mirror, when some solid object comes in the range of the sensors. We are using Arduino boards for this purpose..............

 

Keywords: Arduino Uno board, Servo motor, Ultrasonic sensor, Mirror, Arduino open source program.

[1]. Martin Olsson, Designing and Optimizing Side-View Mirrors, Masters Thesis, Chalmers University of Technology, Gothenburg, Sweden 2011. pp.1-66
[2]. Habibovic A, Andersson J, Malmsten Lundgren V, Staf H, Sundberg N, Traffic Safety and Automated Vehicles, RISE Victoria, Scania CV, Stoneridge Electronics, 2017, pp.1-19
[3]. Morten Elkjaer, Svend Emil Mosbaek, Automated Rear View Mirror, Department of Architecture, Design & Media Technology Niels JernesVej12- 14, 2011, pp.7-12
[4]. 10.13189/ujca.2014.020106, Iran, 02.01.2006, Auto-adjusting Wing Mirrors Angles System Based on Fuzzy Logic Control, 2014.
[5]. Ser. No. 654,210, United States, Apr. 22, Automobile Mirror,1957.